- AVIOM 6416m
- Module d'entrées analogiques niveau Micro ou Ligne pilotable à distance Pro64. Le 6416m est doté de préamplis de haute qualité pouvant étre contrôlés depuis la face avant ou bien à distance via le réseau grâce à l'interface RCI et la surface de contrôle MCS. Une seule surface de contrôle MCS peut piloter plusieurs modules 6416m.
- 2009 marquera l'arrivée d'une nouvelle fonctionnalité, le m-control, permettant désormais au module 6416m d'être contrôlé à partir d'une console Yamaha via les cartes 6416Y2. Ceci vous permettra d'agir sur le gain, l'alimentation fantôme 48V et le coupe-bas. L'interface RCS, accompagnée de sa télécommande MCS, peut être utilisée en parallèle.
- Caractéristiques :
- 16 entrées analogiques avec préampli micro haut de gamme sur XLR
- Connectique d'entrée alternative en Sub-D25
- Gain réglable de 0 à 55 dB par pas de 1 dB - Atténuateur 20dB
- Alimentation fantôme 48V, Phase et Filtre coupe-bas 85Hz commutables par voie
- Vu-mètre à 6 segments par voie
- Activation individuelle des voies. Couplage par paire des voies adjacentes
- 16 mémoires de sauvegarde des paramètres
- Possibilité de contrôle à distance par le réseau A-Net grâce à la combinaison de l'interface de contrôle distant RCI et de la surface de contrôle MCS
- Sortie casque pour écoute de contrôle
- Fonction m-control
- Conversion A/N 24 bits - 44,1/48kHz à 192kHz
- 14 Canaux VDC de données (MIDI, RS232, GPIO)
- Connectique RJ45 réseau A-Net en EtherCon à verrouillage (2)
- Alimentation universelle 100-240VAC intégrée
- Dimensions : 3U, 19", P 305mm. (482.6 x 304.8 x 133 .3 mm)
- Poids : 6,8kg
Product Details
The remote-controllable 6416m Mic Input Module provides 16 state-of-the-art mic- level analog inputs to a Pro64 system. Each channel features continuous gain control, +48V phantom power, low cut filter, phase invert, mute, and a network activation button. With a switchable pad per channel, the 6416m also accepts balanced line-level inputs.
Simplified Remote Control
Audio settings for each channel can be configured from the front panel or controlled remotely using the optional RCI Remote Control Interface combined with the MCS Mic Control Surface. A single MCS can be used to control all 6416m Mic Input Modules in a Pro64 network or those assigned to a particular Control Group. Sixteen mic preamp presets can be saved in each 6416m. The 6416m mic preamp gain can also be remote controlled from a Yamaha console when a 6416Y2 card is installed by using m-control™.
On the rear panel, the 6416m features both XLR jacks and DB25 multipin connectors for inputs and passive splits. A-Net network connections use heavy-duty locking EtherCon® connectors.
Pro64 A-Net supports three ranges of variable sample rates: 44.1/48kHz±, 96kHz±, and 192kHz±. No matter the sample rate, all 16 input channels on the 6416m are available for use. All audio is streamed at 24-bit resolution with no data compression at any time.
Send Control Data Over the Network
The 6416m also includes I/O for Aviom's Virtual Data Cables™. The VDCs can be used for simultaneously distributing up to 14 channels of non-audio control data to any device on the Pro64 network. The 6416m provides VDC connectors for MIDI In, MIDI Out, RS232, and GPIO.
The 6416m also features the security of a rear-panel four-pin XLR connector for optional backup DC power.
Systems
48x16 Digital Snake with Split to Recording
Three 6416m Mic Input Modules are used to take up to 48 mic- and line-level inputs from the stage. Exact digital copies are delivered to both the front of house console and the recording room. Mic preamp settings and presets can be controlled from either location or locked out.