Amplificateurs Behringer - NU6000DSP iNUKE

- BEHRINGER iNUKE NU6000DSP
- Amplificateur de puissance : 2 x 3000 Watts @ 4 Ohms, 2 x 1500 Watts @ 8 Ohms
- Amplification Classe D à haute densité révolutionnaire pour des performances de haut-vol.
- Doté de convertisseurs numériques 24-bit / 96kHz et des fonctions DSP, notamment un délai, un crossover, un égaliseur (8 paramétriques, 2 dynamiques), et un processeur de dynamique avec des paramètres de sécurité qui peuvent être verrouillés.
- L'écran d'affichage à cristaux liquides en façade permet les paramétrages sans PC
- Peut être installé, commandé et surveillé par l'intermédiaire du connecteur USB en façade. Logiciel téléchargeable sur behringer.com
- Réponse en fréquence (+ 0/-2 dB) : 20Hz à 20 kHz
- Rapport Signal/Bruit : >100 dB
- Switch ultra-efficace d'alimentation pour un mode silencieux, un temps de réponse supérieur et une consommation en puissance faible.
- Limiteurs "Zero-Attack" intégrés, offrant un maximum de niveau sortie avec une protection fiable contre la surcharge.
- Crossover Subwoofer/Satellite intégré pour plus de flexibilité
- Contrôles de gain détendus pour paramétrages précis de la sensibilité
- LEDs de Puissance, signal et limite précis pour suivi des performance.
- Entrées combo XLR/Jack 6.35mm
- Sorties en connectique professionnelle Speakons
- L'alimentation indépendante et la protection thermique de surcharge sur chaque canal protège automatiquement l'amplificateur et les haut-parleurs sans arrêter le show.
- Système de ventilation «De l'arrière vers l'avant», y compris le filtre à air pour une grande fiabilité
- Un écran LCD permet de réaliser les configurations et paramétrages directement depuis l’ampli, sans avoir à utiliser un PC et les trois amplis pourront être monitorés, configurés et contrôlés via le port USB présent en façade.
- Les composants de haute qualité et la construction particulièrement solide assurent la longue durée de vie de l'amplificateur.
- Conception et design par BEHRINGER Allemagne
- Poids ultra-léger : 5.5 kg
- Dimensions : 94 x 482 x 310 mm

iNUKE Series power amplifiers pack massive amounts of output power into exceptionally lightweight, rack-mountable packages. Our revolutionary high-density Class-D technology combined with ultra-efficient switch-mode power supplies ensures these feather-light powerhouses will drive your rig effortlessly for many years to come.
Superb transient response

We spent years fine-tuning the high-density Class-D technology that gives the iNUKE Series its oomph. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, these amps react instantly to even the most demanding electronic bass impulses.

When this amazing amplifier technology is combined with our state-of-the-art switching-mode power supplies, these amplifiers provide tremendous punch. And because they are so much more efficient than conventional designs, they run cooler and don’t require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts.
Sublimely simple operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as clip LEDs to indicate when the signal is distorted and you need to reduce the input signal.

The rear panel is just as elegant, with combo XLR and 1/4" TRS input connectors making the iNUKE compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers. The rear panel is also where you’ll find the switches that enable iNUKE amps to work in either dual mono, stereo or mono bridge mode. A built-in CROSSOVER switch enables the amp to operate in biamp mode, sending low frequency content to passive subwoofers, while the high frequency output is channeled to fullrange loudspeakers (CH1etgt;100 Hz / CH2etlt;100 Hz or FULLRANGE). Flick the LIMITER ON/OFF switch to activate the built-in overload protection, or turn it off if you’re feeling lucky.
iNUKE DSP

For sound engineers requiring high-level control capability, iNUKE DSP Series amplifiers come ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (eight parametric, two dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC. All iNUKE DSP models can also be set up, controlled and monitored via the front panel USB connector.
Click HERE to learn more about the PC Remote Editor software for iNUKE DSP.
Value
Sporting massive output ratings, lightweight Class-D technology, an equally lightweight price tag, and all the amenities a professional audio engineer could ask for, BEHRINGER iNUKE amplifiers are serious amps for the most demanding applications.


BEHRINGER PC Remote Editor Software turns your iNUKE DSP-equipped power amp into a robust loudspeaker management system. Just install the software onto your PC, connect to your iNUKE DSP amp via USB and you’re ready to go.

Features include:

*

Plug and play PC Remote Editor Software for iNUKE DSP Series running on the following systems: Windows XP, Windows Vista, Windows 7 (32-bit and 64-bit)
*

Intuitive GUI for easy control and direct access to all DSP functions and parameters
*

Easy-to-use setup page for Presets and File Management
* Select from 5 unique operating modes:
o Dual Mono
o Stereo
o Bi-Amp 1
o Bi-Amp 2
o Bridge

*

Precise I/O Level Control via 22 virtual LED indicators
*

Graphical feedback for Filter/Crossover, Parametric EQ and Dynamic EQ (level dependent equalization)
*

System can be locked to restrict unauthorized access, a must for contractors and rental companies

471 € Peavey Amplificateurs - PV 1500 471 € Ecler Amplificateurs - XLA 1600 475 € QSC Amplificateurs - RMX 1450 485 € HPA Amplificateurs - A3200 509 € JB System Amplificateurs - D2 1200 509 € Crown Amplificateurs - XLS 2000 519 € Peavey Amplificateurs - CS 1400 539 € Power Acoustics Amplificateurs - DJ 750 539 € Cerwin Vega Amplificateurs - CV 1800