Static Microphone

Cardioid Condenser Microphone Audio Technica AT 2035 quality / price ratio at Audio Technica

ARTICLE N° 22256
  • Audio Technica AT 2035
  • Capsule: permanently polarized condenser Fixed-charge with fixed plate
  • Directivity: Cardioid
  • Frequency response: 20-20 000 Hz
  • Low frequency output level: 80 Hz, 12 dB / octave
  • Sensitivity: 33 dB (22.4 mV) ref 1V / Pa
  • Impedance: 120 Ohm
  • Maximum Sound Pressure: 148 dB SPL, 1 kHz at 1% THD ; 158 dB with 10 dB pad (nominal)
  • Dynamic: 136 dB SPL at 1 kHz max.
  • Report Signal / Noise: 82 dB, 1 kHz / Pa
  • Specific phantom power: 11-52V DC, 3.8 mA typical
  • Weight: 403 g
  • Dimensions: Length 170.0 mm (6.69 inches) maximum body diameter 52.0 mm (2.05 in)
  • Output Connector: XLRM-type Integral 3-pin
  • Accessories: AT8458 shock mount for threaded 5/8 "-27; thread adapter for 5/8" -27 to 3/8 "-16; soft protective pouch
  • Large diaphragm for smooth, natural sound and less noise
  • High sound pressure level and outstanding dynamic range, making it particularly versatile microphone
  • Impact protection ensuring better insulation
  • High Pass Filter 80 Hz and 10 dB pad
  • Cardioid polar pattern improves isolation of desired sound source and a reduction of the sound side and rear
  • With shock mount and protective pouch
Designed for live and studio use, but also for business or amateur recordings, this cardioid condenser miking side is distinguished by its extremely detailed rendering and low audible noise level. Featuring a high-pass filter 80 Hz and a 10 dB pad, the? AT2035 easily supports high sound pressure levels. In addition to its robust construction and high performance, the AT2035 provides an exceptional level of consistency from model to model. It comes with a protective case and a shock mount.
Capsule type
 Electret
Application
 Singing, Speaking voice, Video / broadcast, Wind instruments, Drum / percussions
Directivity
 Cardioid
Switchable pad
 Yes
Switchable Bass-Cut filter
 Yes
Acoustic pressure (dB)
 158
Frequency response
 20 Hz - 20 kHz
Shockmount included
 Yes
Popfilter
 No
Microphone clip
 Non
Power supply
 Via +48 V phantom power supply
Connectors
 XLR male 3 pins
Packaging
 Single unit
Color
 Black
The AT2035 is intended for use in applications
Professional for which there is already a source
external power. It requires phantom power 11
52V DC that can be provided by a mixer or a mixer
or from an independent source to be connected in series such that
phantom power AT8801 single-channel or CP8506 four
Audio-Technica channels.
The output of the microphone is symmetrical low impedance, XLR
male, 3 pins. The signal is symmetrical between pins 2 and 3,
the hot spot is two (the positive voltage on the hot spot is
generated a positive sound pressure on the capsule). There
ground (shield) is on pin 1.
To avoid phase cancellation and poor sound
quality, all mic cables must be connected so
consistently: Pin 1-Pin 1, etc.
A high pass filter integrated 80 Hz allows easy switching from
flat frequency response in mitigating serious. The position
highpass is used to make the microphone less sensitive to the "pops"
when used in proximity of voice. It also serves to
reduce sensitivity to low-frequency ambient noise (such
traffic, air-handling systems, etc.), Reverb
the room and mechanically coupled vibrations.
When using the microphone, hook the cable arm or
at the foot of micro leaving soft micro level. It's here
the most effective way to absorb shocks and you may
less accidentally pulling the microphone out of its
support.
Avoid leaving the microphone in direct sunlight or in places
where the temperature is above 43 ° C (110 ° F) for a period
extended. Extremely high humidity should also be avoided.

User's advice Static Microphone
AT2035 Audio Technica

AT2035 Audio Technica
/5
 

3 User's advice

Repartition des notes
Cliquer pour filtrer
BRUNO R 08/12/2020
  5 /5
Purchase Checked
impec
0 0 report
GUILLAUME M 03/07/2019
  4 /5
Purchase Checked
Sympa pour le streaming
0 0 report
FABRICE B 13/09/2016
  5 /5
Purchase Checked
Excellent produit et très bon rapport qualité prix
0 0 report

Spotlight on