Measurement Microphone

Omnidirectional usable able to check the frequency response of a room, calculate and adjust the delay time of a sound system ... Connect the microphone to the input of the talkback StudioLive 24.4.2 console and StudioLive 16.4.2 or via the PreSonus Virtual StudioLive software technology with Smaart mesurement.

ARTICLE N° 49072
  • Presonus PRM1
  • Micro high-precision omnidirectional condenser.
  • Capsule 1/4 "pre-polarized condenser / electret
  • SPL max: 132 dB
  • Dynamic range: (1 kO load) 106 dB
  • linear frequency response 20 Hz to 20 kHz
  • Signal / noise: 70 dB
  • Sensitivity: -37 dB / Pa (14 mV / Pa) 1 Pa = 94 dB SPL
  • 9-52V Food 2mA
  • 3-pin XLR connector
  • metal body
  • Windscreen Grips and hard case included
  • Weight: 150 grams
  • Dimensions: 192 x 21 mm
  • recommended use with PreSonus Virtual StudioLive software technology with Smaart mesurement or PreSonus StudioLive 24.4.2 digital mixer and StudioLive 16.4.2
The PRM1 is an omnidirectional microphone with a metal body using a pre-polarized condenser capsule 1/4 ". You may like to use with Smaart verification assistants integrated into the new version of Virtual StudioLive software PreSonus (for the StudioLive 24.4.2 and 16.4.2 consoles) to check the frequency response of a room, calculate and set the delay time of a sound system, etc. to do this, simply connect the microphone at the entrance of the talkback StudioLive mixer.

Spotlight on