Rme - Babyface Pro

This product is no longer available for sale
We recommend :
Fireface UFX II Rme
Rme - Fireface UFX II
Rme - Fireface UFX II
1 749,17 €
In Stock
Usually shipped within 48h
Audio Interfaces

Babyface Pro RME is a sound card pro composed of 12 channels of inputs and 12 outputs. ADAT / MIDI / USB. No compulsory power supply. Very stable and compact!

ARTICLE N° 50075
  • Sound card RME
  • 12 input channels and 12 output channels
  • 4x analog inputs (microphone, line instrument)
  • 4x analog outputs (2 x XLR, 2 x headphones)
  • 1 input / output ADAT or SPDIF optical
  • 1 input / output MIDI
  • 1 USB 2.0 port (USB 3)
  • digital gain control on all
  • inputs outputs for high or low impedance headphones (6.35mm and quick -Jack)
  • TotalMix FX (with EQ, Reverb, Delay)
  • Analog AD, microphone / line 1-2
  • input: XLR, electronically balanced
  • impedance balanced input 2 kOhm, 5.2 kOhm with Atten.
  • unbalanced input impedance: 1 kOhm, 2.6 kOhm with Atten
  • Signal to Noise Ratio (SNR): 113 dB RMS unweighted, 116 dBA
  • Frequency Response @ 44.1 kHz, 0.1 dB: 18 Hz - 20.8 kHz Response
  • frequency @ 96 kHz, 0.5 dB: 7 Hz - 45.8 kHz frequency response
  • @ 192 kHz 1 dB: 5 Hz - 92 kHz
  • with Atten. active: 0.1 dB 8 Hz, -0.5 dB <4Hz, -1 dB <3 Hz
  • THD < 110 dB <0.00032%
  • THD + N: < 104 dB <0.00063% @ 30 dB THD
  • gain: < 107 dB <0.0004
  • % THD + N @ 30 dB gain: < 100 dB <0.001%
  • channel separation:> 110 dB
  • gain range: 11 dB to +65 dB up
  • Level max input. XLR Gain 0dB: +8 dBu, Atten. 19 dBu
  • maximum input level. XLR Gain 65 dB: 57 dBu, Atten. -46 dBu
  • AN, input / instrument 3-4
  • As Microphone / line 1 2, except:
  • Input: 6.35 mm, asymmetric
  • Input Impedance: 470 kOhm
  • signal to noise ratio (SNR) : 114 dB RMS unweighted, 117 dBA
  • frequency response @ 44.1 kHz, 0.1 dB: 5 Hz - 20.8 kHz frequency response
  • @ 96 kHz, 0.5 dB: <3 Hz - 45.8 kHz frequency response
  • @ 192 kHz, 1 dB: <2 Hz - 92 kHz
  • maximum input level. @ +4 dBu Gain 0dB: +13 dBu maximum input level
  • . @ 10 dBV, Gain 9 dB: -5 dBu
  • NA, line 1-2
  • Dynamic Range (DR): 115 dB RMS unweighted, 118 dBA
  • Frequency Response @ 44.1 kHz, 0.5 dB: 0 Hz - 20.8 kHz frequency response
  • @ 96 kHz, 0.5 dB: 0 Hz - 45 kHz frequency response
  • @ 192 kHz 1 dB: 0 Hz - 89 kHz THD
  • : 106 dB THD + 0.0005%
  • N: 102 dB, 0.0008%
  • channel separation:> 110 dB
  • output: XLR
  • output Impedance 300 ohms symmetrical, asymmetrical
  • 150 Ohm output Level @ 0 dBFS: 19 dBu symmetric, asymmetric 13 dBu
  • DC @ 0 dBFS: 6.35mm 4.8 V, 2.4 V 3.5mm, XLR bal. 9.6 V
  • NA, headphone / phones 3/4
  • As output line except:
  • Output: 6.3 mm TRS jack, unbalanced
  • Output Impedance: 10 Ohm
  • Output Level @ 0 dBFS, 1 kOhm load: 13
  • dBu max. @ 0.1% THD: 50 mW
  • Output: 3.5 mm TRS jack, Asymmetric
  • Output Impedance: 2 Ohm
  • Output Level @ 0 dBFS, 1 kOhm load: 7 dBu
  • Max. @ 0.1% THD: 70 mW
  • MIDI
  • 1 x MIDI I / O via breakout cable with 2 doses 5 pin DIN
  • Mode Hi Speed: jitter and response time typically under 1 ms
  • FIFOs 128 bytes separate for entrance and Release
  • Digital
  • clocks: internal, ADAT in, SPDIF in
  • Design Low jitter: <1 ns in PLL mode, all entries
  • internal clock 800 ps jitter
  • jitter suppression of external clocks:> 50 dB (2.4 kHz )
  • PLL ensures zero dropout, even with a jitter> 100 ns
  • Bitclock digital PLL to varispeed ADAT smoothly
  • sampling frequency: 28 kHz to 200 kHz
  • digital inputs
  • ADAT optical
  • 1 x TOSLINK
  • Standard: 8 channel 24-bit, up to 48 kHz
  • Double Speed ​​(S / MUX): 4 channel 24 bit 96kHz
  • Quad Speed ​​(S / MUX 4): 2 channel 24 bit 192 kHz
  • Bitclock PLL ensures perfect synchronization even in varispeed
  • Pl locking age: 31.5 kHz 50 kHz
  • Jitter in sync input signal: <1 ns
  • jitter suppression:> 50 dB (2.4 kHz)
  • SPDIF optical
  • 1 Optical x, according to IEC 60958
  • Open Consumer formats and Professional
  • locking range: 27 kHz 200 kHz
  • jitter in sync input signal: <1 ns
  • jitter suppression:> 50 dB (2.4 kHz)
  • digital outputs
  • ADAT optical
  • 1 x TOSLINK
  • Standard: 8 channel 24-bit, up to 48 kHz
  • Double Speed ​​(S / MUX): 4 channel 24 bit 96kHz
  • Quad Speed ​​(S / MUX 4): 2 channel 24 bit 192 kHz
  • SPDIF optical
  • 1 optical x, IEC 60958
  • Consumer Format (SPDIF) according to IEC 60958
  • sampling frequency 28 kHz to 200 kHz
  • General
  • supply: USB bus or external power
  • typical consumption: 2.9 Watts
  • consumption max .: 4.6 Wat ts
  • Dimensions (WxHxD): 108 x 35 x 181 mm
  • Weight: 680 g
  • range Temperature range: + 5 ° to + 50 ° Celsius (41 ° F up to 122 ° F)
  • Humidity: <75 % non condensing

User's advice Audio Interfaces
Babyface Pro Rme

Babyface Pro Rme
/5
 

1 User's advice

EMILIO S 24/06/2020
  5 /5
Purchase Checked
Je l'utilise pour de l'enregistrement de podcast ou de prise de voix.
Elle est compact, les préampli sont de grande qualité. Je suis très satisfait !
0 0 report

Spotlight on