ALTO - APX1000
Ce produit n'est plus disponible à la vente
Ces modèles en stock pourraient vous intéresser :
160 €
dont éco-part : 3,10 €
Garantie 3
ans
Jessie
Louis
Besoin d'aide ?
Amplificateur sonorisation
Amplificateur 2x400W RMS / 4 Ohms, 2x250W RMS / 8 Ohms ALTO APX1000, des composants fiables et une endurance épatante à un prix défiant la raison !
ARTICLE N° 32392
Présentation
La série APX dispose de composants fiables pour des amplificateurs robustes et d'une légèreté inégalable !
Autres Caractéristiques
-
ALTO APX1000
-
Série APX
-
Amplificateur Classe D 2 canaux.
-
2x400W en continu sous 4 Ohms, 2x250W sous 8 Ohms, 1000W sous 8 Ohms bridgé.
-
Filtre passe-bas.
-
2 Entrées combo XLR/Jack.
-
2 sorties Speakon.
-
Poids : 5,48Kg.
-
Dimensions : 483mm x 285mm x 88,8mm.
-
Power Specifications:
-
Continuous power (20 Hz – 20 kHz):
-
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
-
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
-
Input Sensitivity: 1.0 V
-
Input Impedance: 10 K Unbalanced
-
Frequency Response: (at 10 dB below rated output power), 20 Hz 25 KHz (+0/-3 dB)
-
Voltage Gain: 32 dB
-
Distortion: (SMPTE 1M) <0.5%
-
S/N Ratio: 110 dB
-
Protection: On/Off, mute, DC fault, load
-
Controls Front: Front Controls: AC power switch, 2 channel level control; –∞ to +30 dB
-
Controls Rear: 30 Hz high pass filter on/off, bridge/stereo/parallel mode
-
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
-
Power Indicators: 1 blue LED integrated with power switch
-
Input Connectors: Balanced XLR F / ¼” combo
-
Output: Touch proof binding posts and Speakon® NL4 connectors
Pour aller plus loin...
The APX1000 delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power-to-weight ratio and performance quality of the APX 1000 means you'll get solid Class D power without breaking your back or your wallet.
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo ¹⁄₄” XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
Applications
* Live sound systems
* DJ systems
* Touring rigs
* Installations
* Arenas and stadiums
* Houses of worship
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo ¹⁄₄” XLR, inputs, "Touch-proof" binding posts and speak-on jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000's level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high-current toroidal transformers for the lowest possible noise floor.
Applications
* Live sound systems
* DJ systems
* Touring rigs
* Installations
* Arenas and stadiums
* Houses of worship
Accessoires
Plein feu sur
La marque ALTO, marque majeure du grand groupe américain NUMARK, s’impose en France comme étant une marque sérieuse, à la pointe de l’innovation et qui propose ses produits à des prix vraiment bas vu leur qualité : les mixeurs de la série ZEPHYR, les tables de studios et lives MASTERLINK, mais surtout leurs enceintes actives et passives de la série TRUESONIC.
