SX3242FX EURODESK Behringer
Console de Mixage Analogique

Console de Mixage Pro., 32 Canaux, 24 Entrées Monos + 4 Stéréos, Idéal pour le Studio, la Scène, une très belle réussite

ARTICLE N° 20911
  • Console de Mixage Pro.
  • Idéal pour le Studio ou la Scène
  • 24 préamplis micros XENYX.
  • Egaliseur “British EQ“ néo-classique 3-bandes, dont médium semi-paramétrique.
  • Sorties 4 bus et sortie additionnelle mono, filtre passe-bas.
  • 2 multi-effets 24-bits intégrant reverb, chorus, flanger, delay, pitch shifter et combinaisons.
  • Egaliseur graphique 9 bandes.
  • Filtre anti-Larsen FBQ.
  • Leds de crêtes, Mute, Main, switch sous-groupes, Solo et PFL par canal.
  • 2 canaux stéréo avec égaliseur 4 bandes, deux entrées additionnelles stéréo avec volume et contrôle auxiliaire pré-fader.
  • Inserts par canal mono et Main Mix.
  • 4 départs auxiliaire par canal : 2 pre/post fader assignables pour le monitoring ou les effets, 2 post-fader pour les effets internes ou envois externes.
  • Sortie Main symétrique en jack 1/4" et connecteurs XLR plaqué or.
  • Contrôle indépendant pour Control Room, casque et magnéto.
  • Fonction Solo-In-Place et écoute pré-fader.
  • Section Talkback.
  • Curseurs de 60 mm à longue durée de vie et potentiomètres clos.
  • Alimentation interne à découpage (100 - 240 V˜)
La réputation de la série Eurodesk n'est plus à faire. Cette série de consoles conçue pour le studio et pour la scène a gravé depuis longtemps ses lettres de noblesse. La qualité sans compromis de ces consoles a très rapidement séduit nombre de musiciens et ingénieurs du son. Profitant des technologies les plus avancées de Behringer, ces consoles offrent plus que jamais un rapport qualité/prix inégalable.Console analogique 32 canaux.
Entrée micro
 24
Entrée instrument
 Non
Entrée ligne
 32
Entrée ligne stéréo
 4
Canaux de sortie
 2
Sortie Master
 XLR, Jack TS 6,35 mm
Sortie d'enregistrement
 Non
Port USB
 Non
Nombre de départ AUX
 4
Départ/Retour FX
 Oui
EQ
 3 bandes
Effets
 2 processeurs multi-effets, Oui
Interface audio
 Non
Enregistrement multipiste
 Non
Support d'enregistrement
 Non
Connexion pour lampe
 Non
Groupes
 Oui
Rack 19"
 Non
Alimentation
 Adaptateur secteur (fourni)
La réputation de la série Eurodesk n'est plus à faire. Cette série de consoles conçue pour le studio et pour la scène a gravé depuis longtemps ses lettres de noblesse.


Features

* Premium ultra-low noise, high-headroom analog mixer
* 24 state-of-the-art XENYX Mic Preamps
* Neo-classic "British" 3-band EQs with semi-parametric mid band
* 4 bus outputs and additional Mono output with sweepable Low Pass filter for subwoofer application
* 2 independent studio-grade 24-bit stereo FX processors with 99 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
* 9-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
* FBQ Feedback Detection system instantly reveals critical frequencies
* Peak LEDs, Mute, Main mix and subgroup routing switches, Solo and PFL functions on all channels
* Standby switch mutes all channels during breaks while background music is provided via CD/Tape inputs
* 2 stereo input channels with 4-band EQ plus 2 additional stereo input channels with Level and pre-fader Aux controls
* Inserts on each mono channel and main mix for connection of outboard equipment
* 4 Aux sends per channel: 2 pre/post fader switchable for monitoring/FX applications, 2 post fader (for internal FX or as external send)
* Balanced Main mix outputs with 1⁄4" jack and gold-plated XLR connectors, separate Control room, Headphone and stereo Tape outputs
* Solo-In-Place and Pre-Fader-Listen functions plus full-featured Talkback section
* Long-wearing 60 mm logarithmic-taper faders and sealed rotary controls
* Internal autorange power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
* High-quality components and exceptionally rugged construction ensure long life
* Conceived and designed by BEHRINGER Germany

BEHRINGER EURODESK SX3242FX FeatureThe new XENYX Mic Preamp matches the sound quality, transparency, headroom and even the dynamic range of boutique-style, stand-alone mic preamps.


BEHRINGER EURODESK SX3242FX FeatureOur neo-classic“British EQ”brings back the warmth and musicality of those ‘60s and ‘70s mega-console desks that made music history.


BEHRINGER EURODESK SX3242FX FeatureThe XENYX FX mixers incorporate a new studio-grade 24-bit FX processor. Get 99 real-world and awesome effect presets at your fingertips.


If you want classic analog handling but can’t skimp on superior digital effects and studio-grade mic preamps, the SX3242FX is your new best friend. This mixer’s 24 microphone inputs, 8 stereo inputs and 4 buses give you enough leeway to handle anything from a graduation speech to a 5-piece band to a whole church service with praise band and choir.
Classic control, state-of-the-art sound

Each of the SX3242FX’s 24 mic inputs connects to our world-famous, studio-grade XENYX mic preamps. They are legendary for their high headroom, warm natural timbre and utter lack of background noise. Plug in a large-diaphragm condenser mic and track a vocal to hear XENYX’s rich detail and spaciousness. Plug in a dynamic mic and stick it inside a bass drum to appreciate the whopping headroom.
You may experience side-FX…

Whether you need to add a dab of reverb or delay to a live vocalist’s mic or warp a hard day’s studio session into psychedelic quicksand, the SX3242FX has you covered. We gave this mixer two independent studiograde 24-bit stereo FX processors with 99 awesome presets to provide the perfect sonic garnish. “Sure they’re great for live sound, but I have a lot of cool plug-ins for recording,” we can hear some of you saying. Truth be told, you never have too many effects. And when you hear the quality of the SX3242FX’s FX, you may want to give your overworked CPU a rest.

Naturally we gave you a whole palette of creative effects like reverb, chorus, flanger, delay and pitch shifter tones, as well as mind-bending multi effects to take your sound out of this world. But you also get problem solving workhorses like compression and gating plus final effects such as Ultramizer, Ultrabass and Exciter that can put a PA or studio mix over the top. And because there are two processors, you can cue two separate effects, then apply one or both to channels 1 through 28 — compression for the vocalist, reverb for the vocalist and snare drum, for example.
What the heck is “British EQ”?

A good thing to have on your side when you start reaching for those channel equalization knobs. At a live concert or in the studio.

Think of it as kinder, gentler, more musical EQ like the type found on classic British consoles from the 60’s and 70’s. Single malt scotch instead of Everclear. Home-baked cherry cobbler instead of an artificial cherry lollypop. British EQ’s distinct configuration of wider curves/lower Q and harmonic phase characteristics allows you to add or subtract EQ more generously than you can with conventional EQ circuit designs. When you add low midrange, you get a firmer sound instead of a nasty bonk. When you back high frequencies off a bit, treble backs off just a hair instead of turning muffled.

All SX3242FX mono channels have low and high shelving plus a sweepable “midrange” you can move anywhere from 100Hz to 8kHz. Think of it as your roving English troubleshooter.
Kill feedback before it maims your audience.

When it comes to suppressing feedback, the SX3242FX is like having a bloodhound trained to spot trouble frequencies a mile away.

The 9-band graphic EQ (which you can choose to apply to your main mix or monitor mix via the MAIN/AUX1 button) features the FBQ Feedback Detection system. It makes finding and adjusting critical frequencies a snap. Just push FBQ IN, then watch as LEDs on the individual EQ sliders light up, indicating which frequency bands are causing feedback. Simply adjust until the LED goes dim.
The Ins and Outs

Some manufacturers make what they call 32-input mixers that count stuff like CD/TAPE IN as an input. But the SX3242FX really gives you twenty-four honest mono channels plus eight stereo channels, making it easy to accommodate a variety of studio or live performance configurations. You can connect up to 24 microphones or other mono instruments and up to four stereo instruments (keyboards or tone modules, for example).

You can combine these input in four different sub-mixes (we call them buses). That allows you to blend multiple channels—say all the mics on a drum kit or all the backup singers’ mics—to a single fader, which is easier to adjust for the overall mix that goes to the PA speakers. You can also use one or more of the sub-mix buses to create custom monitor mixes for picky members of your band (“More me! More me!”).
A zillion ways to change the channel

At the top of each mono channel, you’ll find both a balanced XLR input with a XENYX mic preamp and a 1/4" input. A phantom power switch located on the back near the main power switch accommodates condenser mics.

Next comes is an insert for connecting up individual signal processors or feeding a remote broadcast feed or multitrack recorder directly.

Trim control and level set LED let you adjust the channel’s input level for maximum headroom and minimum noise — the huge range of this control can handle anything from a very timid vocalist to a close-miked guitar amp stack.

Each mono channel features a 3-band EQ with semi-parametric mids (giving you control of the Mid level and a sweepable frequency with a boost or cut of 15dB) and a Trim control for adjusting input gain via a Level Set LED.

A Low Cut button eliminates the frequencies where unwanted infrasonics such as mic handling, P-pops or wind noise occur.

FX1 and FX2 dials add a blend of up to two effects, and AUX1 and AUX2 dials help create your monitor mix. Press the PRE button to send a raw, EQ-free signal to the monitors.

Near every mono channel’s fader you’ll find a 1-2, 3-4 and MAIN button. By engaging the MAIN button, the signal is sent to the main mix. Or, if you engage the 1-2 button, the channel becomes part of a bus. Twist the PAN control all the way to the left to assign it to Sub 1, or all the way to the right for Sub 2. The same principle applies to the 3-4 button.

A Mute button with accompanying LED cuts the signal from the channel, and a Clip LED helps you dial in a distortion-free post-EQ signal. The Solo button on individual channels routes the subgroup signal to the solo bus or Pre-Fader Listen—depending on whether the signal has been included in a subgroup.

Instead of XLR inputs, stereo channels 25-32 have left and right balanced/unbalanced line level inputs. Channels 25-28 feature the same controls as the mono channels, but with a four-band EQ that gives you control of HIGH, HIGH MID, LOW MID and LOW. This is especially useful for EQ’ing the critical midrange frequency content found in keyboard signals. Stereo channels 29 through 32, designed for signals that do not require EQ, have a simplified interface consisting of a Level, AUX1 and AUX2 dial. Can you say laptop backing track feeds, drum machines, tone modules, DJ mixers or CD players?

Finally, all four sub-mix buses feature an independent fader (naturally), Solo switch with bright LED, and assign buttons for routing them to Left or Right stereo channels.
Packed with tasty details that make your creative life easier.

*

We solved the problem of what to do when you want to play music during breaks but don’t want to have to mute every channel or turn down every fader. Just push CD/ Tape STANDBY button to A) mute all mixer channels and B) solo just your CD/Tape source.
*

We didn’t just give you a MONO output for subwoofers. We gave it a built-in variable low pass crossover, saving you money on outboard gear.
*

We added a footswitch jack that you can use to control either internal or external effects.
*

We gave you a complete Phones and Control Room assignment matrix so you can send mains, buses, CD/Tape or auxes out at the touch of a button.
*

We added a routing button to Talkback so you can talk directly to either a monitor mix or the house mix for public announcements.
*

We made the 9-band equalizer assignable to either AUX 1 or the main mix.

Take On The World

Not every town on the planet uses the same voltage common in yours. Unfortunately, this sometimes doesn’t occur to jet-setting sound technicians until they’re 5,000 miles from home. With the SX3242FX, this is never an issue. The internal autorange power supply can run on anything from 100 to 240 V with noise-free audio, top-quality transient response and low power consumption.
Buy it now. Teach your great grandkids how to run it.

BEHRINGER mixers last and last. We use top quality parts such as longwear faders, sealed rotary controls and premium circuit boards. We have 20 years of experience figuring out how to compensate for clumsy load-ins, spilled drinks, crazed guitarists and millions of road miles. The result is a mixer you can count on day after day and night after night.
Why do you need this mixer?

*

Built-in pristine XENYX mic preamps… LOTS of them
*

Dual 24-bit FX processor with 99 presets including reverb, chorus, flanger, delay and pitch shifter tones
*

British-style EQ dials give you the sound and control preferred by top studio engineers
*

The built-in FBQ Feedback Detection system instantly reveals critical frequencies and the 9-band stereo graphic EQ allows precise correction of those frequencies in monitor or main mixes
*

Awesomely complete I/O – everything from bus inserts to mono output

Finally, “And now for something completely similar.”

If you’ve read this product sheet and loved everything about the SX3242FX except it seemed like a bit too much mixer for your current needs, we have good news for you. It has a little brother, the SX2442! Sixteen mono channels each with superb XENYX mic preamps. And of course every other feature you’ve just read about. But in a smaller form factor and lower price. See both models at your BEHRINGER Dealer today.

Avis utilisateurs Console de Mixage Analogique
SX3242FX EURODESK Behringer

SX3242FX EURODESK Behringer
4.0/5
 

1 Avis utilisateurs

ANDRE K 26/01/2018
  4 /5
Achat Vérifié
très bon produit en rapport qualité prix
0 0 signaler
Vous avez une question sur le produit SX3242FX EURODESK Behringer ?
Nos responsables produit répondent à vos questions
du lundi au samedi de 9h à 19h
9
Echanges
MichelD7832

25/07/2015

LES SORTIES RETOUR
Bonjour, J'aimerais savoir comment brancher 3 retours de scène dans lesquels les chanteurs entendront la reverb.
merci
BlandineL3945

25/07/2015

bonjour MichelD , je ne sais pas quelle sorte de retour que tu utilise, le plus simple c le branchement en linéaire ou en chaine c'est a dire du sorti premier retour vers l'entrée 2 éme retour, du sortie 2 eme retour
vers l'entrée 3 éme retour. avec c système tu peux branché autant de retour. tu branche un seul retour sur la table. Merci
stan25423616

26/07/2015

Sinon tu utilise les sous groupes (4). Et tu pourras régler le volume de chaque piste + reverb sans soucis.
MichelD7832

26/07/2015

Un énorme merci pour vos réponses....
Pour répondre à BlandineL3945 : Si je branche les retours en chaine, tous les réglages sont les mêmes pour les 3 chanteurs, c'est pour cette raison que j'aimerais pouvoir les brancher séparés...

Pour répondre à StanyB9062 : si j'utilise les sous groupes, comment régler la reverb de chaque piste? je n'ai pas trouvé... Merci encore à vous deux pour vos réponses... j'attends avec impatience une solution avec explications...
MichelD7832

26/07/2015

Pardon, dans l'euphorie, j'ai oublié de vous dire BONJOUR... je corrige '' Bonjour '' . . .
stan25423616

27/07/2015

Tu règles la reverb sur chaque pistes avec le bouton Fx de la piste. Et il faut que tu renvoie le signal reverb sur le sous groupe (au niveau des effets, le petit bouton 1-3 ou 2-4 est à appuyer) et pis voilà.
MichelD7832

10/08/2015

Merci à tous pour vos réponses . . . J'ai eu un soucis ce week-end... J'ai fait des balances, tout est parfait, puis une heure après je rallume la table et mauvaise surprise, le son ne sort plus , ni par les sorties SUB ni par les sortie MAIN... je ne l'entends que si je mets les faders à fond et, encore il e.... par contre la sortie casque fonctionne parfaitement... Merci de m'aider . . .
mali14631140

10/05/2016

y a t-il une vidéo sur youtube en français sur la description
Bonjour
y a t-il une vidéo sur youtube en français sur la description de la table de mixage behringer sx3242fx?
surtout sur l'utilisation des sous groupes
Merci
bigband

10/05/2016

bonjour sur le site Thomann il y a la documentation complète en Français de mémoire.

Plein feu sur