Artnovion - GlueArt 3.0
22,50 €
excl VAT
Out of stock
Contact us for delivery times
Anais
Tristan
Do you need help?
Acoustic Treatment Accessories
Artnovion GlueArt 3.0, tube for glue gun. Formula designed for acoustic treatment panels.
ARTICLE N° 116549
Presentation
Artnovion GlueArt 3.0 - Professional glue cartridge for acoustic treatment
Artnovion's GlueArt 3.0 is a high-performance polymer adhesive specially developed for the installation of foam and expanded polystyrene (EPS) acoustic panels. It guarantees reliable, long-lasting adhesion to a wide range of substrates, in both domestic and professional environments.
Lightweight panels such as Myron E adhere almost instantly. Heavier panels start to bond after around 10 minutes, with a safety factor of over 10, guaranteeing reliable long-term hold.
Simple, effective installation
1- Make sure the surface is clean, dry and free from dust and grease.
2- Apply the adhesive to the back of the panel using a putty gun. For very uneven surfaces, apply the adhesive to the wall as well.
3- Position the panel where you want it and apply firm pressure.
The panel should be installed within 10 minutes of application. For heavier elements, a temporary support is recommended until complete hardening. Any attempt to reposition the panel after bonding may reduce the effectiveness of the adhesion. Final setting time depends on adhesive thickness, ambient temperature and humidity level.
Yield per cartridge
One cartridge of GlueArt 3.0 allows you to install :
- 8 flat acoustic foam panels (Agad, Thor, Myron E, etc.)
or
- 8 framed foam panels (Andrea, Andes, etc.)
Artnovion's GlueArt 3.0 is a high-performance polymer adhesive specially developed for the installation of foam and expanded polystyrene (EPS) acoustic panels. It guarantees reliable, long-lasting adhesion to a wide range of substrates, in both domestic and professional environments.
Lightweight panels such as Myron E adhere almost instantly. Heavier panels start to bond after around 10 minutes, with a safety factor of over 10, guaranteeing reliable long-term hold.
Simple, effective installation
1- Make sure the surface is clean, dry and free from dust and grease.
2- Apply the adhesive to the back of the panel using a putty gun. For very uneven surfaces, apply the adhesive to the wall as well.
3- Position the panel where you want it and apply firm pressure.
The panel should be installed within 10 minutes of application. For heavier elements, a temporary support is recommended until complete hardening. Any attempt to reposition the panel after bonding may reduce the effectiveness of the adhesion. Final setting time depends on adhesive thickness, ambient temperature and humidity level.
Yield per cartridge
One cartridge of GlueArt 3.0 allows you to install :
- 8 flat acoustic foam panels (Agad, Thor, Myron E, etc.)
or
- 8 framed foam panels (Andrea, Andes, etc.)
Other features
-
Artnovion GlueArt 3.0
-
Special acoustic treatment adhesive cartridge
-
An improved, more effective formula
-
GlueArt 3.0 benefits from a new formulation that is much more effective than the previous version. It offers :
-
faster setting
-
optimum adhesion to acoustic foam and EPS, especially Myron diffusers
-
greater resistance to humidity
-
compatibility with almost all wall substrates
-
a non-flammable, non-irritating formula with no harmful fumes
-
double the adhesive strength of previous GlueArt products
-
an installation capacity that allows around 30% more panels to be installed per cartridge
-
This acoustic adhesive can be applied effectively to a wide range of materials, including :
-
concrete and cement
-
painted walls
-
natural stone
-
wallpaper
-
plasterboard
-
wood and chipboard
-
PVC and expanded plastics
-
mineral fibres
-
metal surfaces
-
Weight : 0.51 kg
