Cioks - Flex 2200 Voltage Doubler
4,16 €
excl VAT
In Stock
Usually ships within 3 days
+infos
Guarantee 5
years
Fred
Eric
Do you need help?
Pedal Power
By using two isolated sockets, the Flex 2200 adapter gives you the sum of the voltages of the two sockets used. This adapter cable should be used in conjunction with one of the other cables in the Flex series if you want to power an 18V, 24V or even 40V pedal. It gives you the option of choosing the type of plug on the pedal side, as well as the length you need.
ARTICLE N° 73963
Presentation
Note that the Stack Flex establishes a series connection between the two output sockets used.
These two sockets must be isolated from each other.
You obtain the sum of the voltages (Volt) and not the current (Ampere).
If you use it with two 9V sockets each rated at 100mA, you'll get 18V and still a maximum current of 100mA.
BE CAREFUL when using Stack Flex.
There is a risk of damaging your 9V pedals by supplying it with too high a voltage.
Be sure to check the specifications of your pedals.
These two sockets must be isolated from each other.
You obtain the sum of the voltages (Volt) and not the current (Ampere).
If you use it with two 9V sockets each rated at 100mA, you'll get 18V and still a maximum current of 100mA.
BE CAREFUL when using Stack Flex.
There is a risk of damaging your 9V pedals by supplying it with too high a voltage.
Be sure to check the specifications of your pedals.
Other features
-
Cioks Flex 2200
-
Designed in Denmark, assembled in Poland
-
5-year warranty
-
Connections :
-
2 x RCA Male
-
RCA Female
-
Length : 100mm
-
Weight : 50 g
-
Cable working specifically with Cioks power supplies
-
Please note that none of the ends of this cable can be plugged directly into a pedal. You'll need the other standard Flex cables, adapted to your pedals.
