Dap - FP12150 Bleu 1,5 m
20,42 €
excl VAT
including eco-part : 0,05 €
In Stock
Usually ships within 4 days
+infos
Guarantee 3
years
REFERENCE : DAPCABLEFP12150
Anais
Louis
Do you need help?
Dmx Cable
With the DAP FP12150 cable, you get a 2-in-1 solution for your shows. It incorporates IEC C14/C16 connectors for the power supply and 3-pin XLRs for the DMX protocol. You benefit from a nominal current of 16 A, enough to power the majority of modern LED spotlights. Its effective shielding and 110 ohm impedance guarantee the integrity of the control signal throughout.
ARTICLE N° 112082
Presentation
The 1.5 m Dap FP12150 is a hybrid cable designed to simplify stage installations. It combines an IEC power line and a DMX line in a single run.
Its C14 and C13 connectors support a nominal current of 16 A. At the same time, its 3-pin XLR sockets ensure stable DMX communication.
The 110 Ω impedance complies with data transmission standards. The copper used for the contacts guarantees optimum conductivity. Conductor resistance is limited to 80 Ω/km, reducing losses.
The 15 mm blue PVC sheath provides effective protection against wear. A shield with a resistance of 30 Ω/km enhances electromagnetic safety. The 60 pF/m capacitance ensures good signal quality.
With an IP20 rating, the cable is suitable for indoor use. The paper coating and twisted structure provide extra protection.
Its C14 and C13 connectors support a nominal current of 16 A. At the same time, its 3-pin XLR sockets ensure stable DMX communication.
The 110 Ω impedance complies with data transmission standards. The copper used for the contacts guarantees optimum conductivity. Conductor resistance is limited to 80 Ω/km, reducing losses.
The 15 mm blue PVC sheath provides effective protection against wear. A shield with a resistance of 30 Ω/km enhances electromagnetic safety. The 60 pF/m capacitance ensures good signal quality.
With an IP20 rating, the cable is suitable for indoor use. The paper coating and twisted structure provide extra protection.
Features
Length (m)
3.50
Cable type
Straight
Connectors
IEC male, IEC female, XLR female 3 pins, XLR male 3 pins
Color
Blue
Water & Dust Protection (IP rating)
IP 20
Other features
-
DAP FP12150
-
DMX cable and power supply
-
Serial: FP12
-
Connector 1: IEC C14 male (mains plug)
-
Connector 2: IEC C13 female (mains socket)
-
DMX In connector: XLR 3P male
-
DMX Out connector: XLR 3P female
-
Length: 1.5 m
-
Rated current: 16 A
-
Operating voltage: 30 V
-
Impedance: 110 Ω
-
Conductors: twisted copper
-
Outer insulation: PVC
-
Outside diameter: 15 mm (0.59")
-
Colour : Blue
-
Protection rating : IP20 (Indoor only)
-
Operating temperature: -20°C to 60°C
-
Weight : 363 g
