HF System Accessories

T-27X1D-040.0 is a 40m coaxial antenna cable with TNC plugs. Protected by a highly effective double shield, it provides a clear signal with very little attenuation or interference.

ARTICLE N° 88551
Whether on stage or on the road, the HF reception antennae of wireless microphones often have to be connected to their receivers over long distances. These lengths can be subject to considerable interference, generated in particular by electrical cables, transformers, electronic light control or mobile phones.

The T-27X1D-040.0 is designed to provide perfect protection against this type of interference. It incorporates a 7-strand 0.91mm inner conductor, a thick layer of physically dielectric Foam-Skin PE insulation and a double shield consisting of a film and a braid of high-coverage bare copper (>82%). This design guarantees optimum signal transmission and extremely low attenuation.

Despite its very thick internal components, this 50 Ohm "low loss" coaxial cable is fairly flexible, with a minimum bending radius of 70 mm.
Accessory Type
 antenna cable
  • Klotz T-27X1D-040.0
  • HF coaxial antenna cable
  • Cable type: GA27FLEX coaxial - 50 Ohm
  • Inner conductor: bare copper strands, 7x 0.91mm (AWG 10/7)
  • Insulation: Foam-Skin PE, physical foam, Ø 7.2mm
  • Shielding: Cu PET foil and bare copper braid (82% coverage)
  • Outer sheath: Ø10.3mm PVC
  • Minimum bending radius: 70mm
  • Connectors: TNC male Damar & Hagen
  • Contacts: gold-plated
  • Cable colour: black
  • Length: 40m
When transmitting over the maximum length, please note the technical data for your transmission system
Klotz - Câble antenne coaxial à fiches TNC, 40m
Klotz - Câble antenne coaxial à fiches TNC, 40m
332,50 € excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3  years
Jessie
Jessie
Louis
Louis
Do you need help?

Spotlight on