Multicolor laser

High-power colour laser, 10,000 mW guaranteed! With an integrated multi-control motherboard. Easy control via DMX / ArtNET with internal security settings, so you can easily control multiple units at the same time as the rest of your DMX lighting. Full show laser software licence included! Sealed optical section for low maintenance, perfect for large nightclub installations, indoor events, small outdoor events and allows incredible chase effects on large productions using a high number of the same units.

ARTICLE N° 90348
Start a professional laser show with the intuitive Showeditor software that comes free with every new Laserworld PL-10.000RGB MK3. Showcontroller software is also supported and can be purchased separately.

The integrated ShowNET interface allows direct control via ILDA and LAN. In addition to DMX, individual animations can be triggered via ArtNET. Customised effects and shows can be played back from an integrated SD card (included), even in stand-alone music mode!

The Laserworld PL-10.000RGB MK3 is also IP54-rated for outdoor use.

This laser offers a low-cost solution for applications requiring high laser power. It is ideal for large nightclubs and medium-sized stages, offering brilliant colours and very good linear modulation. This makes it just as indispensable for long-distance volumetric shows as it is for basic graphic projections.
LASER animation
 Yes
LASER class
 4
Color spectrum
 RGB
ILDA
 Yes
Master-slave
 Yes
Mirror speed (KPPS)
 40
LASER grating
 Yes
Electrical Chain
 Yes
DMX chain
 Yes
Security key
 Yes
Outdoor use
 Yes
Auto programs
 Yes
DMX control
 Wired
  • Laserworld PL-10.000RGB MK3
  • RGB laser system
  • Guaranteed power: 10,000 mW
  • Red power: 3,000 mW / 638 nm
  • Green power: 4,000 mW / 520 nm
  • Blue power: 4,000 mW / 450 nm
  • Beams : 5.5 mm / 1.0 mrad
  • Scanners : 40kpps @ 8° ILDA
  • Max. scan angle : 50°
  • Laser sources: diodes
  • Laser class: 4
  • Operating modes: ILDA, DMX, LAN, ArtNet, ILDA streaming, built-in SD card, stand-alone / master-slave mode
  • Basic patterns: approx. 120 effects (tunnel, wave, sawtooth, etc.)
  • Accessories: flight case, interlock connector, key, power cable, operating instructions, software licence (Showeditor, upgradeable to Showcontroller)
  • IP rating: IP54
  • Power supply: 85-250V AC 50/60Hz
  • Power consumption: 350W
  • Dimensions: 345 x 240 x 207mm
  • Weight : 14,6kg
Start a professional laser show with the intuitive Showeditor software that comes free with every new Laserworld PL-10.000RGB MK3. Showcontroller software is also supported and can be purchased separately.

The integrated ShowNET interface allows direct control via ILDA and LAN. In addition to DMX, individual animations can be triggered via ArtNET. Customised effects and shows can be played back from an integrated SD card (included), even in stand-alone music mode!

The Laserworld PL-10.000RGB MK3 is also IP54-rated for outdoor use.

This laser offers a low-cost solution for applications requiring high laser power. It is ideal for large nightclubs and medium-sized stages, offering brilliant colours and very good linear modulation. This makes it just as indispensable for long-distance volumetric shows as it is for basic graphic projections.
Laserworld - PL-10.000RGB MK3 ShowNet
Laserworld - PL-10.000RGB MK3 ShowNet
4 333,33 € excl VAT
including eco-part : 0,90 €
Guarantee 3  years
Anais
Anais
Jessie
Jessie
Do you need help?

Spotlight on