Mac Mah - FT-3000
207,50 €
excl VAT
including eco-part : 0,90 €
In Stock
Shippable immediately
+infos
Guarantee 3
years
Anais
Jessie
Do you need help?
Smoke Machine
Mac Mah FT-3000 3000W smoke machine, a machine specially designed for firefighter training, in SDIS. An impressive flow rate of 1100 m3/min, controllable via DMX. Highly efficient, it will guarantee you an ultra-realistic simulation during your training. Comes with 2 remote controls: 1 wired and 1 wireless!
ARTICLE N° 77979
Presentation
The Mac Mah FT-3000 is a portable smoke generator capable of producing an impressive amount of smoke over a long period of time. It is ideal for firefighters in fire and rescue operations (SDIS) to safely train firefighters in situations of intense smoke.
The FT-3000 is essential in the training of our "firefighters" for protection and firefighting. The red color is significant; it identifies the device and its primary function, dedicated to firefighters and emergency responders responding to fires.
It only takes 5.5 minutes of preheating to be operational. With a power output of 3000 W, the FT-3000 is capable of projecting 1100 m3/minute of smoke at a distance of up to 10 meters. With the simple push of a button, you'll instantly generate a consistent fog to simulate dense fires. The FT3000 fog machine can thus produce fog continuously, as long as there's fog fluid in the 3-liter tank.
Two remote controls are included: one wired and one wireless, with on/off functions and fog volume adjustment. Remote control is also possible thanks to the DMX512 connector.
The FT-3000 is essential in the training of our "firefighters" for protection and firefighting. The red color is significant; it identifies the device and its primary function, dedicated to firefighters and emergency responders responding to fires.
It only takes 5.5 minutes of preheating to be operational. With a power output of 3000 W, the FT-3000 is capable of projecting 1100 m3/minute of smoke at a distance of up to 10 meters. With the simple push of a button, you'll instantly generate a consistent fog to simulate dense fires. The FT3000 fog machine can thus produce fog continuously, as long as there's fog fluid in the 3-liter tank.
Two remote controls are included: one wired and one wireless, with on/off functions and fog volume adjustment. Remote control is also possible thanks to the DMX512 connector.
Features
Fog flow
> 1000m3/min
DMX chain
Yes
Power
3000
Direction of ejection
Horizontal
Type of liquid
Water base
Outdoor use
Yes
Weight
7,5 kg
Power supply
220 V
DMX control
Wired
Other features
-
Mac Mah FT-3000
-
Professional smoke machine
-
Impressive output
-
Unbeatable value for money
-
3000W power
-
3-meter wired and wireless remote controls included
-
DMX512 controllable
-
Heat-up time: approximately 5.5 minutes
-
Smoke projection: up to 10 meters
-
Tank capacity: 3 liters
-
Flow rate: 1100 m3/minute
-
Mounting bracket
-
Voltage: 120-230 VAC / 50-60 Hz
-
Steel body with fire engine red finish
-
Dimensions (L x W x H): 550 x 340 x 290 mm
-
Weight: 7.5 kg
-
CE compliant
-
IP20 protection rating
To find out more...
The Mac Mah FT-3000 heavy fog machine's control system is designed to be simple and convenient, but it's important to understand how the system works to get the most out of it.
This model comes with two types of remote controls: a wired remote control and a wireless RF remote control.
The unique feature is that the RF signal receiver, the component that receives commands sent by the wireless remote control, is integrated directly into the wired remote control.
This means that the wired remote control is not just a simple manual control unit. It also acts as an essential relay for the machine to receive the RF signal.
In concrete terms, if the wired remote control is not connected to the FT-3000 via its dedicated connector, the RF receiver receives no power and cannot transmit commands sent by the wireless remote control. As a result, the remote control will not work.
It is therefore essential to always connect the wired remote control to the device, even if you are only using the wireless function.
This ensures that the RF receiver is powered and that communication between the RF remote control and the machine is operational.
This configuration allows the user to have flexible and reliable control of the heavy fog distribution, whether from the wired control station or remotely via RF.
This model comes with two types of remote controls: a wired remote control and a wireless RF remote control.
The unique feature is that the RF signal receiver, the component that receives commands sent by the wireless remote control, is integrated directly into the wired remote control.
This means that the wired remote control is not just a simple manual control unit. It also acts as an essential relay for the machine to receive the RF signal.
In concrete terms, if the wired remote control is not connected to the FT-3000 via its dedicated connector, the RF receiver receives no power and cannot transmit commands sent by the wireless remote control. As a result, the remote control will not work.
It is therefore essential to always connect the wired remote control to the device, even if you are only using the wireless function.
This ensures that the RF receiver is powered and that communication between the RF remote control and the machine is operational.
This configuration allows the user to have flexible and reliable control of the heavy fog distribution, whether from the wired control station or remotely via RF.
Videos
Additional documents
You may also like
Spotlight on
French brand known for its audio equipment for personal and professional use for more than 15 years, Mac Mah is also famous for its effects and light effects machines. Whether it's with AS amplified speakers, Flat PAR LED projectors, you can find power even with a small budget. Mac Mah also offers multi-source players and animation bars with an excellent quality/price ratio.
