Panaro - HDSPUMAX465H125 - Kit complet haute densité

When several items of equipment share the same case, the main risk does not come from the outside, but from contact between the elements themselves. The HDSPUMAX465H125 responds to this problem by creating a clear separation between each piece.

The kit consists of a set of complementary foams that transform the interior of the MAX465H125 case. The bottom foam absorbs shock-related stresses, the pre-cut central foam allows you to define locations, and the honeycomb lid foam stabilises the contents once closed.

The middle section plays a central role. It allows separate zones to be created for each piece of equipment, thus avoiding friction or internal impact. This configuration is particularly suitable for assemblies made up of microphones, transmitters, small audio accessories or electronic modules.

The high density makes the partitions more durable. The walls created remain firm, limiting deformation and guaranteeing stable organisation over time. Each element remains in its place, even when frequently moved.

Cutting is done by hand, without the need for special tools. You can adapt the interior to suit your needs, creating spaces that are wider or narrower depending on the equipment to be fitted.

With the HDSPUMAX465H125, the case becomes a compartmentalised unit, where each element is isolated, held in place and protected from the others.