Rockboard - Mod ISO DC1
74,17 €
excl VAT
including eco-part : 0,05 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Pedal Power
The RockBoard MOD ISO DC1 powers ten pedals without generating any hiss. Each output is isolated at 9 VDC and transformer-filtered. It easily blocks unwanted noise and buzz. Short-circuit protection saves your live sets. A 5 VDC, 2000 mA USB-C output recharges your digital accessories. No bulky transformers to deal with, everything stays clean under your feet.
ARTICLE N° 106725
Presentation
The RockBoard MOD ISO DC1 is a multi-power supply for effects pedals that gets straight to the point.
Its eight isolated outputs eliminate any ground loops. Each pedal retains a clean, interference-free power supply.
The 500 mA output supplies your reverbs or multi-effects without faltering. Even the most power-hungry units find their breath.
The USB-C port powers a wireless receiver, tuner app or tablet. Everything comes from the same hub, without adding bulk.
The two traction clamps secure the cables. Even in a hectic rehearsal, nothing slips or gives way.
The integrated filter cuts unwanted high frequencies. That persistent buzz finally disappears from the signal.
The 60 cm flat cables simplify every installation. Fewer knots, greater clarity.
This model is compatible with most cranksets, with or without a faceplate. It has a discreet format, solid construction and carefully thought-out power distribution.
Its eight isolated outputs eliminate any ground loops. Each pedal retains a clean, interference-free power supply.
The 500 mA output supplies your reverbs or multi-effects without faltering. Even the most power-hungry units find their breath.
The USB-C port powers a wireless receiver, tuner app or tablet. Everything comes from the same hub, without adding bulk.
The two traction clamps secure the cables. Even in a hectic rehearsal, nothing slips or gives way.
The integrated filter cuts unwanted high frequencies. That persistent buzz finally disappears from the signal.
The 60 cm flat cables simplify every installation. Fewer knots, greater clarity.
This model is compatible with most cranksets, with or without a faceplate. It has a discreet format, solid construction and carefully thought-out power distribution.
Features
Exit intensity (A)
1,5 A
Polarity
Negative in the center
Voltage
24 V
Weight
500 g
Length (m)
0.60
Power supply
Power adapter (included)
Accessory Type
Wires
Other features
-
Rockboard Mod ISO DC1
-
Multiple power supply for effects pedals
-
Transformer-isolated, filtered slots
-
Fits into MOD RockBoard® slot
-
Compatible with most pedalboards
-
Removable front plate for flexible mounting
-
Advanced filter blocks high-frequency noise
-
External transformer prevents low-frequency interference
-
Integrated input polarity protection
-
Status LED and short-circuit protection
-
2 cable strain relief clips
-
Input power: 24 VDC / 1.5 A
-
Outputs: 8 x 9 VDC, 300 mA
-
1 x 9 VDC, 500 mA
-
1 x 5 VDC USB-C output, 2000 mA
-
24 VDC mains adapter included
-
Interchangeable multi-region adapters included
-
Input voltage 100-240 V AC
-
9 x 60 cm RockBoard® flat cables included
-
Dimensions with plate: 175 × 85 × 47 mm
-
Dimensions without plate: 160 × 85 × 33 mm
-
Weight: 500 g
