Rockboard - Power Block
57,50 €
excl VAT
including eco-part : 0,14 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Pedal Power
RockBoard's Power Block is a compact, multiple power supply for effects pedals, capable of powering up to 10 pedals simultaneously. It features 8 9 V and 2 18 V outputs, all protected against short circuits. Each output has its own diagnostic LED, so there's no need for hazardous wiring. With its included cables, multi-region adapters and lightweight construction, it fits into any pedalboard without making a mess.
ARTICLE N° 105834
Presentation
At first glance, the RockBoard Power Block might seem like a simple accessory. But in reality, it plays the role of your pedalboard's controller. This discreet little block supports up to 10 pedals, including 8 at 9 V and 2 at 18 V, while maintaining a stable voltage. Each output has its own LED, which immediately warns you of a short-circuit or reversed polarity. Handy when your fuzz stubbornly refuses to sing. It's a bit like the bodyguard of your effects, keeping an eye on the connections like a policeman plugged into the mains. And with a total capacity of 2,000 mA, you've got plenty of headroom before you reach saturation.
The Power Block RockBoard isn't there to furnish your flight case. It comes with everything you need to play from the moment you plug it in: a universal mains adaptor compatible with European, British, American and Australian plugs, plus 10 x 50 cm RockBoard flat cables. So you don't have to worry about multiple plugs drooling into corners or dodgy extension leads under your pedalboard.
A reliable central power supply is like a tranquilliser for fussy pedals. With its compact dimensions and a mere 150g, RockBoard's Power Block fits easily into even the most minimalist of setups. But its small size doesn't mean it's any less effective, nor does it promise to silence your noise. Try it out, your noise gate might get a little bored.
The Power Block RockBoard isn't there to furnish your flight case. It comes with everything you need to play from the moment you plug it in: a universal mains adaptor compatible with European, British, American and Australian plugs, plus 10 x 50 cm RockBoard flat cables. So you don't have to worry about multiple plugs drooling into corners or dodgy extension leads under your pedalboard.
A reliable central power supply is like a tranquilliser for fussy pedals. With its compact dimensions and a mere 150g, RockBoard's Power Block fits easily into even the most minimalist of setups. But its small size doesn't mean it's any less effective, nor does it promise to silence your noise. Try it out, your noise gate might get a little bored.
Features
Exit intensity (A)
2 A
Polarity
Negative in the center
Voltage
9 V + 18 V
Weight
150 g
Length (m)
0.50
Power supply
220 V
Connectors
PC36 male EU
Accessory Type
Power supply, AC adapter
Other features
-
RockBoard Power Block
-
Power supply for effects pedals
-
Part Number : RBO POW BLO V2
-
Type : stabilized power supply
-
Input voltage: 100-240 V AC
-
Input frequency : 47-63 Hz
-
Total number of outputs: 10
-
Maximum total current: 2 A
-
9 V DC outputs: 8
-
Total current at 9 V outputs: 1,200 mA
-
18 V DC outputs: 2
-
Total current at 18 V outputs: 800 mA
-
Output connectors : Barrel Ø5.5 x ø2.1 mm, negative centre
-
Cables included: 10 RockBoard Flat Power cables, 50 cm
-
Protection: short-circuit protection on all outputs
-
Short-circuit indicators : Individual red LEDs per output
-
Mains adapters included: EU, UK, US/CA, AU/NZ
-
Dimensions: 112 x 60 x 22 mm
-
Weight: 150 g
To find out more...
The Power Block is for all guitarists and bassists who lug their pedalboards from one studio to another, from a damp room to a brightly lit stage. Whether you're a fan of vintage fuzz, a digital delay enthusiast or a fan of endless loops, this stabilised power supply will save you many an existential crisis in the middle of a rehearsal.
If you want to get the most out of your set-up, consider pairing the RockBoard Power Block with a pedalboard stand from the same brand or a suitable hard case. A few short patch cables or a cable clamp won't go amiss if you want to keep your setup neat and tidy. Because a well-cabled pedalboard is half the battle.
If you want to get the most out of your set-up, consider pairing the RockBoard Power Block with a pedalboard stand from the same brand or a suitable hard case. A few short patch cables or a cable clamp won't go amiss if you want to keep your setup neat and tidy. Because a well-cabled pedalboard is half the battle.
