Audix - M60N Nickel
549,17 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Jessie
Louis
Do you need help?
Conferencing System
Ideal for boardrooms, meetings, videoconferencing and podiums, wherever aesthetics and audio quality are of paramount importance, the M60N is a miniaturised condenser surface microphone. Cardioid by design, it produces a hemi-cardioid polar pattern when placed on a flat surface such as a table, floor, wall or podium, and its fully integrated electronics are immune to interference typically caused by mobile phones and GSM devices.
ARTICLE N° 68749
Presentation
The remarkable design of the M60N brass enclosure is achieved through a complex process using a computer-controlled machining centre.
The bottom of the case is treated with a shock-absorbing material and features two threaded holes that allow the M60N condenser microphone to be bolted in a permanent position.
A 30cm high quality shielded cable is connected directly to the internal circuitry of the M60N and allows the cable to exit the enclosure at either 180 or 90 degrees, depending on whether or not the cable is routed through a drilled surface.
The bottom of the case is treated with a shock-absorbing material and features two threaded holes that allow the M60N condenser microphone to be bolted in a permanent position.
A 30cm high quality shielded cable is connected directly to the internal circuitry of the M60N and allows the cable to exit the enclosure at either 180 or 90 degrees, depending on whether or not the cable is routed through a drilled surface.
Other features
-
Audix M60N
-
Surface condenser microphone
-
Finish : Nickel-plated
-
Directivity: Hemi cardioid
-
Frequency response: 70 Hz to 8 kHz
-
Impedance : 150 ohms
-
SPL Max: 130 dB
-
Sensitivity : 68 mV/PA @ 1k
-
Connectors: 3-pin male XLR
-
Dimensions: 63 x 16.5 mm
-
Weight : 232 g
