Audix - M60NP Nickel
549,17 €
excl VAT
including eco-part : 0,07 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Jessie
Louis
Do you need help?
Conferencing System
Primarily used in boardrooms, meeting rooms, videoconferencing facilities and on podiums, where aesthetics and audio quality are of paramount importance, the M60NP is a miniaturised condenser microphone with fully integrated electronics and immunity to interference. Designed with cardioid pick-up, a hemi-cardioid polar pattern is produced when mounted on a flat surface such as a table, floor, wall or podium. Designed, manufactured, assembled and tested by Audix in the USA!
ARTICLE N° 68752
Presentation
The remarkable design of the M60NP brass enclosure is achieved through a complex process using a computer-controlled machining centre.
The bottom of the case is shock-absorbing and features two threaded holes that allow the M60NP condenser microphone to be bolted in a permanent position.
A high-quality, 30cm shielded microphone cable is connected directly to the M60's internal circuitry and allows the cable to exit the enclosure at either 180 or 90 degrees, depending on whether or not the cable is routed through a drilled surface.
The bottom of the case is shock-absorbing and features two threaded holes that allow the M60NP condenser microphone to be bolted in a permanent position.
A high-quality, 30cm shielded microphone cable is connected directly to the M60's internal circuitry and allows the cable to exit the enclosure at either 180 or 90 degrees, depending on whether or not the cable is routed through a drilled surface.
Other features
-
Audix M60P
-
Surface condenser microphone
-
Finish : Nickel-plated
-
Directivity: Hemi cardioid
-
Frequency response: 70 Hz to 8 kHz
-
Impedance : 150 ohms
-
SPL Max: 130 dB
-
Sensitivity : 68 mV/PA @ 1k
-
Connections : 3-pin Phoenix terminal block
-
Dimensions: 63 x 16.5 mm
-
Weight : 232 g
