Dap - CA-4500 DSP
Great deal
Recommended price
925 €
695,83 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 4 days
+infos
Guarantee 3
years
REFERENCE : DAPCA4500DSP
Jessie
Louis
Do you need help?
Multichannel Amplifier
The DAP CA-4500 DSP is a high-power 4-channel digital amplifier. With its 4Ω impedance, four 500W speakON outputs and powerful DSP, it can power a 70/100V speaker system and two channels of 1,000W each in bridge mode. Particularly recommended for an installation system, it can be configured both manually and on any Windows laptop thanks to its included software.
ARTICLE N° 88871
Presentation
Equipped with a powerful DSP and adapted to the installation market (70/100V), the CA-4500 DSP offers full configuration with 8-band EQ, delay, compression and noise gate. Configuration can be carried out manually or using the included software via a Windows computer. In addition, the four input and output channels are freely routable.
The CA-4500 DSP can be used in both bridge and stereo modes, and is powered by Class D amplification, with features such as soft-start technology and a clipping limiter. All this technology is housed in a compact 19-inch case just 1 unit high.
The CA-4500 DSP can be used in both bridge and stereo modes, and is powered by Class D amplification, with features such as soft-start technology and a clipping limiter. All this technology is housed in a compact 19-inch case just 1 unit high.
Features
Canals
4
Effects
Amplifier, Noise Gate
Power supply
Power adapter (included)
19" rack
1U
Other features
-
DAP CA-4500 DSP
-
4-channel digital amplifier
-
Output Channels: 4
-
Output Gain : 34 dB
-
Output Modes : 4-channel, Bridge, Mono, Stereo
-
Stability under 2 ohm: No
-
Outputs: 4x speakON
-
Output per channel 8 ohms at 1kHz: 250W
-
Output per channel 4 ohms at 1kHz: 500W
-
Bridge output 8 ohms at 1kHz: 1000W
-
Output per channel 8 ohms at 20Hz > 20kHz: 250W
-
Output per channel 4 ohms at 20Hz > 20kHz: 500W
-
Bridge output 8 ohms at 20Hz > 20kHz: 1000W
-
Bridge output 100V: 1000W
-
Inputs: 4x XLR 3p. mono
-
Impedance Mono Input : 20000Ω
-
THD Distortion Level : < 0.15
-
Signal-to-noise ratio : > 96dB
-
AD/DA sampling frequency : 96kHz
-
Audio Latency : 1.5ms
-
SLEW Rate: 25V/μs
-
Amplification : Class D
-
Dampings Factor : 180 :1
-
Crosstalk : 60 dBu
-
Frequency Response : 20Hz - 20kHz
-
Compatibility : Windows
-
Parametric input EQ : 8 Bands
-
Parametric Output EQ : 8 Bands
-
Input EQ Type : Bell, High Shelf, Low Shelf, Notch
-
Output EQ Type : High Shelf 6, High Shelf 12, Low Shelf 6, Low Shelf 12
-
Frequency Cut Filter Type: Bessel, Butterworth, Linkwitz Riley
-
Frequency cut-off curve: 6, 12, 18, 24, 30, 36, 42, 48 dB
-
Compressor, Gate, Limiter
-
Phase inversion
-
Electronic protection: Clip limiter (fixed), DC voltage, Overheat, Overload, Short circuit, Softstart, Thermal
-
Internal storage: User presets
-
Control Mode: Manual, PC Software
-
Display : OLED
-
Power supply: 220V-240V/AC 50Hz
-
SMPS included
-
Power consumption: 1741W
-
Fuse: 10A
-
Power connector: IEC
-
Data connector: USB
-
Dimensions: 483 x 44 x 285mm
-
Installation depth (excluding connector): 285mm
-
Case : Metal
-
Rackable : 19" 1U
-
IP Rating: IP20 (indoor use only)
-
Colour: Black
-
Weight : 5.9 kg
-
IEC cable included
