Laney - DB200H Digbeth Series
390,83 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 3 days
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Amplifier Heads for Bass
The Digbeth DB200H bass amp head offers ultra-modern features in a compact format with a vintage look. It has a dual preamplifier stage: Lamp AND FET transistor. The 2 sections are of course selectable, allowing you to play in radically different musical worlds, but they're also mixable, so you can get the best out of both worlds.
ARTICLE N° 89597
Presentation
Among the great artists who put their trust in Laney are Alex Thomson (Witch Fever), Garment (Gashhine) and Jim Cratchley (Dinosaur Pile-Up), who use the Digbeth DB200H.
To complement this amp head, Lanay has designed the DBV 410-4 and DBV 212-4 cabinets.
Why Digbeth?
It was in this part of Birmingham that Laney was born.
To complement this amp head, Lanay has designed the DBV 410-4 and DBV 212-4 cabinets.
Why Digbeth?
It was in this part of Birmingham that Laney was born.
Features
DI output
Yes
Headphone output
Yes
Effects
Saturation, Distortion, Equalizer
Preamp Tube
Yes
External effects loop
Yes
Peak power (W)
400
RMS power (W)
200
Speaker output
Yes
Power supply
220 V
Other features
-
Laney DB200H
-
Electric Bass amp head
-
Series : Digbeth
-
2-channel
-
Class D amp: 200W rms
-
2 Preamp Sections: Lamp & FET Transistors
-
Mixable and footswitchable preamps
-
4 selectable Medium EQ curves
-
TILT EQ Seesaw function
-
Switch Source : Post / Pre
-
Ground Lift Switch : On / Off
-
Connectors :
-
Instrument input : Ø6.35mm jack
-
FX Loop: 2x Ø6.35mm jacks
-
Auxiliary input: mini-Jack Ø3.5mm
-
DI output: XLR (Pre / Post EQ)
-
Cabinet output: Speakon/Jack Ø6.35mm
-
Headphone output: Ø3.5 mm mini-jack
-
Power supply: 110/240V - 50/60hZ - 75W
-
Dimensions: 300 x 210 x 180mm
-
Weight: 4.1kg
To find out more...
The DB200-210 features a dynamic and powerful Tilt SEE SAW EQ control. This control has a central neutral position:
- Turning the knob clockwise increases the mid and high frequencies and decreases the bass, giving your sound more presence, which can be useful for being heard through a live band.
- Turning the knob anticlockwise reduces the mid and high frequencies and increases the bass, making your overall sound rounder and fatter.
Effects loops are important because they allow you to add effects to the signal path at a specific point: between the preamp stage and the power stage.
This insert is at a decisive point because it allows you to place time effects (Delay, Phasers...) after the already saturated preamp section, offering a completely different result to the classic connection before the amp.
The DI output lets you connect your amp to a PA system or recording interface, without the need for a microphone.
A ground lift switch lets you reduce or eliminate any unwanted hum caused by ground loops.
- Turning the knob clockwise increases the mid and high frequencies and decreases the bass, giving your sound more presence, which can be useful for being heard through a live band.
- Turning the knob anticlockwise reduces the mid and high frequencies and increases the bass, making your overall sound rounder and fatter.
Effects loops are important because they allow you to add effects to the signal path at a specific point: between the preamp stage and the power stage.
This insert is at a decisive point because it allows you to place time effects (Delay, Phasers...) after the already saturated preamp section, offering a completely different result to the classic connection before the amp.
The DI output lets you connect your amp to a PA system or recording interface, without the need for a microphone.
A ground lift switch lets you reduce or eliminate any unwanted hum caused by ground loops.
