Laserworld - PRO-800RGB

This product is no longer available for sale
PRO-800RGB Laserworld
Multicolor laser

The Laserworld PRO-800RGB is a white light RGB laser light system with analog modulation and a total output power of up to 800mW. It is not only equipped with fast scanners for great projections, it also comes with the super bright 637nm red, that is visible several times better than the 650nm plus has a thinner, more accurate beam profile. Therefore the Laserworld PRO-800RGB ensures great visibility and is suitable for beam as well as for graphics projections.

ARTICLE N° 50559
  • Puissance totale typique: 800mW
  • Puissance garantie: 700mW
  • Puissance rouge: 120mW / 637nm
  • Puissance vert: 120mW / 532nm
  • Puissance bleu: 460mW / 445nm
  • Classe laser: 4
  • Spécifications du faisceau: env. 3mm / env. 1.3mrad
  • Scanner: Galvo system, jusqu'à 40kpps @4°
  • Angle d'ouverture: 40° max. / 80° for glass effects
  • Source laser: Diode, DPSS Laser
  • Modes d'opération: auto, music, DMX, ILDA, master-slave, SD Card
  • Motifs de base: >200 Patterns (faux plafond, tunnels, dents de scie, vagues etc.; grating & 3D effects)
  • Accessoires: câble électrique, remote control unit, SD Card, Mode d'emploi, interlock connector, clé
  • Alimentation électrique: 85V - 250V AC
  • Consommation électrique: 50 W
  • Dimensions: 235/205/165 mm
  • Poids du produit: 4.45 kg
The integrated effects can be used individually through selecting a dip switch on the back panel or with a DMX controller, in addition all integrated effects can be used through Automatic mode or Music Mode including in conjunction with ILDA software for spectaculars results
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.

Proline Series Dip Switch settings:

Normal scanner mode – creates emotionalizing beam shows and graphics projections (Dip Switch 5)
Burst Grating mode – the scanned pattern is multiplied many times and covers a wide range (Dip Switch 6)
3D Effect mode – creates a great 3D-looking effect on the scanned pattern (Dip Switch 8)
Radial Pattern Effect mode – A pattern is displayed in the center, the effect shows a multitude of this projection in circles around the center projection (Dip Switch 7)

Computer control:
The Laserworld PRO-800RGB has an ILDA interface for professional computer control. Thus own or pre-programmed lasershows can be displayed by use of a laser control software, e.g. Laserworld Showeditor.

DMX Mode:
Through DMX preset patterns, like waves, tunnels, circles etc. can be projected in different colors and at various speed.

User's advice Multicolor laser
PRO-800RGB Laserworld

PRO-800RGB Laserworld
/5
 

2 User's advice

FRANCOIS P 24/07/2018
  5 /5
Purchase Checked
super effet
0 0 report
PATRICK F 18/07/2017
  4 /5
Purchase Checked
Très bon produit pour le prix, mais un peu délicat à piloter en DMX, pas encore testé avec un logiciel ILDA
0 0 report

Spotlight on