MXR - M239 Mini Iso-Brick
98,33 €
excl VAT
including eco-part : 0,05 €
In Stock
Usually ships within 48h
+infos
Guarantee 3
years
Fred
Eric
Do you need help?
Pedal Power
Whether you need a space-saving solution for your travel pedalboard or simply need to feed a small, carefully organised selection, this little box has what you need
ARTICLE N° 79913
Presentation
The Mini Iso-Brick power supply has 5 outputs, and each is fully isolated to eliminate ground loop noise.
Four of the outputs deliver 9 volts at 300 mA, while a fifth can be set to deliver 9 volts or 18 volts at 800 mA depending on your requirements.
With a generous amount of current and the ability to handle both negative and positive ground, these outputs will fit almost any pedal, analogue or digital.
Don't let the five outputs restrict you, if you need to add an extra pedal, the Mini Iso-Brick power supply is there for you.
It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and you don't exceed the current rating of the output.
You can do this with all the outputs simultaneously, just buy the extra cables to do so.
Because stages are often dark, the Mini Iso-Brick power supply is equipped with LEDs to let you know that all your connections are established.
Combine that with a lightweight case built like a tank, and you can take to the stage with the confidence that your pedalboard will stay powered from gig to gig.
Four of the outputs deliver 9 volts at 300 mA, while a fifth can be set to deliver 9 volts or 18 volts at 800 mA depending on your requirements.
With a generous amount of current and the ability to handle both negative and positive ground, these outputs will fit almost any pedal, analogue or digital.
Don't let the five outputs restrict you, if you need to add an extra pedal, the Mini Iso-Brick power supply is there for you.
It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and you don't exceed the current rating of the output.
You can do this with all the outputs simultaneously, just buy the extra cables to do so.
Because stages are often dark, the Mini Iso-Brick power supply is equipped with LEDs to let you know that all your connections are established.
Combine that with a lightweight case built like a tank, and you can take to the stage with the confidence that your pedalboard will stay powered from gig to gig.
Other features
-
MXR M239 Mini Iso-Brick
-
Multiple power supply
-
4 x 9 V outputs (4 x 300 mA)
-
1 x 9 V/18 V output (800 mA)
-
Possibility of powering 2 9 V pedals on the 18 V output using the included Y-cable
-
High-quality components for silent operation
-
Isolated outputs avoid ground loops
-
LED indicator
-
Supplied with cables
-
Power supply: ECB009 18-volt adapter (supplied)
