Neutrik - NC3MXCC
This product is no longer available for sale
These models in stock may be of interest to you:
Neutrik's NC3MXCC 3-pole XLR connector provides near-total protection against electromagnetic interference for reliable digital audio transmission. Its rugged zinc die-cast construction and gold-plated contacts ensure optimum durability and signal quality.
ARTICLE N° 97357
Presentation
The Neutrik NC3MXCC 3-pole XLR cable connector is designed to provide optimum EMI protection thanks to its circumferential shielding contact. This connector is ideal for transmitting AES/EBU type digital audio signals, ensuring reliable and efficient performance.
The NC3MXCC incorporates a coaxial ground spring and a hexagonal crimp ring at the cable entry, allowing a safe and reliable transition from the shield to the die-cast zinc shell, thus providing better durability.
In addition, its chuck-type strain relief system ensures secure cable fixation, while its rubber boot protects against bending stresses.
Neutrik's XCC connector series, of which the NC3MXCC is a part, is distinguished by its ability to provide superior RF protection, the connector is designed to accommodate cables with an outer diameter of 5.4 to 6.2 mm, with gold-plated contacts for better conductivity and minimal resistance.
The NC3MXCC incorporates a coaxial ground spring and a hexagonal crimp ring at the cable entry, allowing a safe and reliable transition from the shield to the die-cast zinc shell, thus providing better durability.
In addition, its chuck-type strain relief system ensures secure cable fixation, while its rubber boot protects against bending stresses.
Neutrik's XCC connector series, of which the NC3MXCC is a part, is distinguished by its ability to provide superior RF protection, the connector is designed to accommodate cables with an outer diameter of 5.4 to 6.2 mm, with gold-plated contacts for better conductivity and minimal resistance.
Features
Connector type
Male
Number of pins
3
Quality of contacts
Nickel Plated, Gold Plated
Color
Aluminium
Accessory Type
Connector adapter
Connectors
XLR male 3 pins
Other features
-
Neutrik NC3MXCC
-
3-pin XLR male connector
-
Capacitance between contacts: ≤ 4 pF
-
Contact resistance: ≤ 3 mΩ
-
Dielectric strength: 1.5 kVdc
-
Insulation resistance: > 10 GΩ (initial)
-
Nominal current per contact: 16 A
-
Nominal voltage: < 50 V
-
Shielding effectiveness: > 55 dB @ 1.3 GHz
-
Cable outer diameter: 5.4 - 6.2 mm
-
Crimp size: 6.47 Hex (screen) compliant with IEC 60803 (die designation E)
-
Insertion force: ≤ 20 N
-
Withdrawal force: ≤ 20 N
-
Service life: > 1000 mating cycles
-
Max. cable cross-section : 2.5 mm²
-
Max. cable cross-section: 14 AWG
-
Solder contacts
-
Latch lock
-
Sleeve: Polyurethane
-
Coding ring: PA 6 15% GR
-
Contact plating: Hard alloy in 0.2 µm Gold on 2 µm Nickel
-
Contacts: Brass
-
Nickel plated crimping ring
-
Insert: Polyamide (PA66)
-
Latch / Shell: Die-cast zinc
-
Strain relief: Polyacetal (POM)
-
Approvals: UL
-
Flammability: UL 94 V-0
-
Standards compliance: IEC 61076-2-103
-
Protection class: IP 40
-
Solderability: Complies with IEC 68-2-20
Spotlight on
NEUTRIK
connectors, unavoidable for any utilisation, whether it is in studio, stage or
other, it is the inevitable brand known for its manufacturing quality and its
high output in information transfer through cables. For your connectors, think
Neutrik!
