Wired Microphones

professional-quality microphone especially designed for voice performance in Live

ARTICLE N° 26809
  • Micro studio quality
  • Metal Fabrication
  • Satin Nickel Finish
  • High resistance head subjected to a heat treatment
  • Specially designed to reduce plosives
  • Balanced output
  • Very good signal / noise ratio
  • Very low sensitivity to shocks
  • Comes with pouch and clip
  • Designed and manufactured in Australia.
  • 5 year warranty
  • Acoustic Principle: polarized condenser, pressure gradient sensor
  • Pattern: Supercardioid
  • Frequency response: 20Hz ~ 20KHz
  • Output Impedance: 50 Ohm
  • Signal / noise DIN / IEC 651: 75 dB (1 kHz rel 1 Pa, for IEC651, IEC268-15)
  • Equivalent Noise: 18 dBA SPL (for IEC651, IEC268-15)
  • Maximum SPL: 151 dB (@ 0.7% THD at 1kOhm)
  • Sensitivity at 1 kHz into 1 kohm: -46.5 dB re 1 Volt / Pascal (4.7 mV @ 94 dB SPL) +/- 2 dB to 1kOhm
  • Maximum Output Voltage: +12.5 dBu (@ 0.7% THD at 1kOhm)
  • Dynamic range of the microphone amplifier DIN / IEC 651: 132 dB (with IEC651, IEC268-15)
  • Power supply: Phantom Power - 44V to 52V
  • Current consumption: - 4.4 mA
S1 consists of the best electronic for optimal sound reproduction. Its frequency response has been designed to ensure the reproduction of the voice as clear as possible, while minimizing the signal / noise ratio. This unidirectional microphone (super cardioid) limit the background noise and greatly reduces the effects of Larsen.

Spotlight on