Allen & Heath - DLIVE-CDM32
The Allen & Heath DLIVE-CDM32 Class C digital console features a high-end XCVI FPGA processor with a 96 kHz sampling rate that guarantees exceptional audio quality and ultra-low latency. It has 32 inputs and 16 outputs, expandable to 128 and 64 respectively. With GigaACE and DX ports, it ensures extensive connectivity and optimal signal transmission while the BNC Wordclock port ensures perfect synchronization between the different devices in your setup. Its remarkable RackExtra effects processor provides numerous sound modulation possibilities to adjust the sound according to the needs of the artists and the listening environment. The Allen & Heath DLIVE-CDM32 allows you to achieve high-level audio performance on stage and in the studio.
Presentation
Thanks to its 24-bit Delta-Sigma ADC/DAC conversion and a dynamic range of 110dB, every sonic detail is captured with remarkable precision and clarity.
The DLIVE-CDM32 is distinguished by its ultra-low latency of only 0.7 ms, which ensures instantaneous responsiveness during live performances and recording sessions. With 32 inputs and 16 outputs expandable via DX ports up to 128 input channels and 64 fully configurable mix outputs, as well as its 64 adaptive buses for groups, effects, auxes, matrices and main LR, LCR configurations up to 5.1, it meets the complex needs of any audio production with great flexibility.
This high-end console integrates 16 RackExtra effects with dedicated stereo returns and a powerful DEEP processing system that includes advanced plugins such as compressor emulations and graphic EQs, allowing you to sculpt the sound with precision.
In addition, the console offers an automatic microphone mixer (AMM) for up to 64 channels spread over 4 zones.
In terms of connectivity, the DLIVE-CDM32 is equipped with a GigaACE port for fast audio data transmission, two DX ports for simplified I/O expansion, and a dedicated ME-1 port for seamless integration of your personal mixing system.
It is also equipped with a Wordclock port to connect different devices to ensure perfect synchronization and avoid phase and desynchronization problems.
Its standard 19" rack format and reversible rack ears allow for front or rear installation, while its ultra-quiet fan ensures discreet and efficient operation.
With the Allen & Heath DLIVE-CDM32, you are ready to reach new heights in audio quality and performance on stage or in the studio.
Features
Other features
-
Allen & Heath DLIVE-CDM32
-
128 I 64 digital mixing console
-
96kHz XCVI FPGA processor
-
Variable bit depth: precision and anti-noise performance
-
96-bit accumulator, virtually infinite mixing headroom
-
Ultra-low latency of 0.7 ms
-
Sampling Rate 96kHz +/- 20 PPM
-
24-bit ADC / DAC conversion: Delta-Sigma
-
Dynamic range 110dB
-
Signal-to-noise ratio -92dB
-
Frequency response: 20Hz - 30kHz (+0/-0.8dB)
-
Analog gain +5 to +60dB, in 1dB steps
-
THD+N: 0.015% @ +16dBu output (1kHz, gain 0dB)
-
Input channels: 128
-
Mix outputs: 64
-
Buses: 64, configurable (group, FX, aux, matrix, mains)
-
LR, LCR and up to 5.1 modes
-
Multiple pre-listening (PFLs)
-
16 RackExtra effects with dedicated stereo returns
-
AMM: Automatic Microphone Mixer (AMM) up to 4 zones, 64 channels
-
DEEP processing – powerful built-in plugins including GEQ and compressor emulations
-
24 DCAs (Assignable Digital Control Associations)
-
Connections:
-
32x XLR mic/line inputs + +48V phantom power
-
16x XLR line outputs
-
Network ports: 2x RJ45
-
Gigabit port to MixRack: 1x GigaACE
-
Ports I/O expansion: 2x DX – 128 channels at 96 kHz
-
Dedicated ME-1 port at 48 kHz
-
Wordclock inputs/outputs: 1x BNC
-
Slot for expansion card (sold separately)
-
Flush front panel with ultra-quiet fan
-
Standard 19" rack format (5U)
-
Reversible rack ears
-
Dimensions: 481 x 309 x 221 mm
-
Weight: 10kg
Additional documents
Spotlight on
Allen & Heath is proud to have designed all of its mixers from its headquarters in Cornwall, England since 1969. Allen & Heath's R&D team maintains the company's place at the forefront of technology and is committed to using the best materials to deliver the ultimate mixing experience and outstanding audio performance. Today's Allen & Heath mixers are used and enjoyed by bands, houses of worship, and clubs for DJ, broadcast and studio applications. Check out the ZED Series for the demanding sound engineer and the Allen & Heath XONE Series for the creative DJ!
