Axel Technology - Oxygen 3000 Plus 16 Fader 2A Dante
New
9 540 €
excl VAT
Out of stock
Guarantee 3
years
The 2A configuration gives the Oxygen 3000 Plus a particularly extensive range of inputs and outputs, whilst the 16 × 16 Dante interface provides a direct AoIP link to the network infrastructure. The Oxygen 3000 Plus 2A Dante, from Axel Technology, is therefore well-suited to complex radio studios, multi-source control rooms and environments where audio equipment is distributed across the network.
ARTICLE N° 126736
Presentation
At the heart of a radio control room where the number of sources is constantly growing, the 16 Fader 2A Dante version offers an architecture capable of centralising a large number of connections without compromising routing flexibility. The two Audio I/O cards provide capacity for 10 microphone inputs with Automix, up to 8 analogue stereo inputs depending on source allocation, as well as 8 analogue stereo outputs. The console can also handle up to two Bluetooth interfaces, two AES/EBU or USB digital inputs, two AES/EBU outputs and up to four USB audio inputs.
The 16 × 16 Dante interface complements this connectivity by providing a network-based audio link, configurable in mono, stereo or Telco modes. It enables the exchange of signals with other Dante-compatible equipment and simplifies certain control room set-ups by reducing the number of physical audio connections. The Oxygen 3000 Plus range also supports AES67 and integrates with AoIP environments.
Audio processing is based on a 50 × 50 digital routing matrix and offers I/O latency of less than 0.7 ms. Each input features broadcast-grade processing, with a 5-band parametric equaliser and dynamic processing on the microphone inputs. The control surface features a 7-inch IPS TFT graphic display, individual displays above the faders, customisable RGB keys and eight configurable Smartkeys.
The Oxygen 3000 Plus also incorporates the functions required for communication and broadcasting: telephone hybrids, Telco, Bluetooth, talkback, Control Room and Studio monitoring, as well as an integrated decoder and streamer. Finally, the Oxygen Remoter software allows you to add up to eight virtual faders to extend control over the console.
The 16 × 16 Dante interface complements this connectivity by providing a network-based audio link, configurable in mono, stereo or Telco modes. It enables the exchange of signals with other Dante-compatible equipment and simplifies certain control room set-ups by reducing the number of physical audio connections. The Oxygen 3000 Plus range also supports AES67 and integrates with AoIP environments.
Audio processing is based on a 50 × 50 digital routing matrix and offers I/O latency of less than 0.7 ms. Each input features broadcast-grade processing, with a 5-band parametric equaliser and dynamic processing on the microphone inputs. The control surface features a 7-inch IPS TFT graphic display, individual displays above the faders, customisable RGB keys and eight configurable Smartkeys.
The Oxygen 3000 Plus also incorporates the functions required for communication and broadcasting: telephone hybrids, Telco, Bluetooth, talkback, Control Room and Studio monitoring, as well as an integrated decoder and streamer. Finally, the Oxygen Remoter software allows you to add up to eight virtual faders to extend control over the console.
Features
Number of ways
16
Motorized faders
Yes
Audio interface
USB
DAW MIDI Control
Yes
Stereo line input
8
Micro input
10
Digital input
RJ45
Digital output
RJ45
Headphone output
2
Digital multi-channel / network
DANTE
Media player
USB
Optional expansion cards
Yes
Recording medium
USB
USB port
Yes
Weight
25 kg
Power supply
220 V
Connectors
XLR male 3 pins, XLR female 3 pins, HDMI, Jack female Stéréo, RJ45
Packaging
Single unit
Other features
-
Axel Technology Oxygen 3000 Plus 16 Faders 2A Dante
-
Digital broadcast mixing console
-
Version: 16 faders, 2 audio I/O cards, 16 × 16 Dante
-
Number of faders: 16
-
Virtual faders: up to 8
-
Architecture: fully digital audio processing
-
Buses: PGM, SUB, AUX 1, AUX 2, PFL
-
Quick selection: A/B buttons on each fader
-
Audio routing: 50 × 50 digital matrix
-
Latency: < 0.7 ms
-
Microphone inputs: up to 10 with Automix
-
Phantom power: +48 V
-
Microphone processing: 5-band parametric EQ, compressor, expander, AutoFader and ducking
-
Stereo analogue inputs: 4, up to 8 depending on configuration
-
Digital inputs: 2 AES/EBU via XLR with SRC
-
Analogue outputs: 8 balanced
-
Digital outputs: 2 AES/EBU via XLR
-
Telephone hybrids: 1 to 2 built-in
-
Telco interfaces: 1 to 2 N-1 inputs/outputs
-
Additional Telco channels: up to 8 depending on configuration
-
Bluetooth: up to 2 interfaces
-
USB audio: up to 4 USB Type-B stereo interfaces
-
Streaming: 1 input and 1 output
-
Dante: 16 × 16 I/O, compatible with AES67 and SMPTE ST 2110-30
-
Main display: 7" colour IPS TFT
-
Per-fader display: 2.2" IPS TFT
-
HDMI output: display and configuration
-
Monitoring: control room and studio with independent source selection
-
GPI/GPO: up to 18 inputs/outputs depending on configuration
-
Smartkeys: 8 customisable
-
Function keys: 2 per fader
-
Snapshots: 10 configurations
-
EQ presets: up to 10
-
Remote control: Oxygen Remoter and web interface
-
DSP: Analog Devices ADAU1452, 32-bit / 294 MHz
-
Network: Gigabit Ethernet
-
Power supply: 90 to 264 V AC, 50 to 60 Hz
-
Power consumption: 120 W
-
Dimensions: 944 × 113.5 × 495.5 mm
-
Weight: 25 kg