Crown - CDi 2 300
1 121,67 €
excl VAT
including eco-part : 3,10 €
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
PA Amplifier
Whether in a well-organised rack or an ambitious fixed installation, Crown's CDi DriveCore 2|300 amplifier delivers controlled, constant energy to power a variety of speakers and audio systems. Its modern architecture is aimed at system integrators and enthusiasts alike who want to control their sound systems precisely. With its optimised design and advanced signal management, this model is an efficient solution where each watt finds its natural place, without getting lost in unnecessary detours.
ARTICLE N° 89392
Presentation
The DriveCore technology built into the Crown CDi 2 300 drastically reduces internal components, stabilising overall operation and improving sound reproduction, even when the system is running for long hours.
With its particularly comprehensive on-board DSP, this amplifier allows fine signal adjustment thanks to its 8-band parametric input and output equalisation, as well as delays of up to 1000 ms, facilitating precise configurations adapted to each sound space.
You can also count on network management via HiQnet Audio Architect, enabling you to configure and monitor the device remotely, simplifying work in multi-zone installations where every parameter needs to remain quickly accessible.
The 2-channel power output reaches 300 W at 4 Ω or 8 Ω, with bridged mode options of up to 600 W, offering flexibility for powering both compact loudspeakers and larger systems.
With its particularly comprehensive on-board DSP, this amplifier allows fine signal adjustment thanks to its 8-band parametric input and output equalisation, as well as delays of up to 1000 ms, facilitating precise configurations adapted to each sound space.
You can also count on network management via HiQnet Audio Architect, enabling you to configure and monitor the device remotely, simplifying work in multi-zone installations where every parameter needs to remain quickly accessible.
The 2-channel power output reaches 300 W at 4 Ω or 8 Ω, with bridged mode options of up to 600 W, offering flexibility for powering both compact loudspeakers and larger systems.
Other features
-
Crown Audio CDi DriveCore 2|300
-
Power Amplifier
-
Series : CDi
-
Technology : DriveCore
-
Amplifier type : Class D
-
Channels : 2
-
Power :
-
2x 150 W @ 2 Ω
-
2x 300 W @ 4 Ω
-
2x 300 W @ 8 Ω
-
2x 150 W @ 16 Ω
-
Flanged power :
-
300 W @ 4 Ω
-
600 W @ 8 Ω
-
600 W @ 16 Ω
-
600 W @ 140 Vrms
-
600 W @ 200 Vrms
-
Line power 70/100 V : 2x 300 W
-
Direct output: 70 Vrms & 100 Vrms
-
Frequency response : 20 Hz ⭢ 20 kHz
-
Max power : 1 kHz, 0,5 % THD
-
Damping factor: > 1000
-
Signal-to-noise ratio: > 104 dB
-
Sensitivity: 0.7 V RMS
-
Crosstalk: > 80 dB
-
THD: 0.35
-
Input impedance: 20 kΩ balanced / 10 kΩ unbalanced
-
Control & monitoring via HiQnet Audio Architect (TCP/IQ)
-
Front panel with full control
-
.
-
DSP :
-
Input router
-
Input parametric equalization: 8 bands
-
Output parametric equalisation: 8 bands
-
Input delay: up to 1000 ms
-
Output delay: Up to 100 ms
-
Limiter: LevelMAX
-
Filter: Crossover
-
.
-
Connections :
-
Inputs : EuroBloc 6 pins
-
Outputs : 4-port terminal block
-
GPIO/AUX control port: 8-pin EuroBloc
-
Network interfacing: RJ45
-
Power supply: 100 ⭢ 240 V ∿ IEC 320
-
Format Standard Rack 19" : 2 U
-
Dimensions : 483 x 311 x 89 mm
-
Weight : 6,6 kg
To find out more...
Remember to use speaker cables with a good cross-section to ensure stable transmission and avoid any unnecessary loss.
You could also consider a network controller or compatible audio router, to take full advantage of remote control, and add a ventilated rack to help maintain a constant temperature during prolonged use.
The Crown brand develops professional amplifiers recognised in the world of sound reinforcement, with a wide range covering fixed installation, touring and commercial environments. Their approach is based on reliability, intelligent power management and digital tools designed to simplify every audio project.
You could also consider a network controller or compatible audio router, to take full advantage of remote control, and add a ventilated rack to help maintain a constant temperature during prolonged use.
The Crown brand develops professional amplifiers recognised in the world of sound reinforcement, with a wide range covering fixed installation, touring and commercial environments. Their approach is based on reliability, intelligent power management and digital tools designed to simplify every audio project.
