Hollyland - Beltpack Solidcom M1 Pro
New
655 €
excl VAT
In Stock
Usually ships within 24h
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
The Solidcom M1 Pro beltpack allows every member of a team to join the wireless intercom network whilst maintaining clear and instant communication. Its dual-microphone ENC system reduces background noise, whilst the built-in controls provide direct access to conversation, group and volume settings.
ARTICLE N° 126453
Presentation
The Solidcom M1 Pro beltpack is the mobile unit used by operators to communicate within the intercom system. Operating on the 1.9 GHz band, it offers a range of up to 400 metres in line of sight, allowing teams to stay in contact whilst moving freely around their operational area.
To improve intelligibility in busy environments, Hollyland has equipped the handset with a dual-microphone ENC system. The main microphone picks up the user’s voice, whilst a second microphone captures information about ambient noise. On-board processing then uses this data to reduce unwanted noise, with attenuation of up to 20 dB.
Day-to-day use is particularly straightforward. The TALK button allows the user to join the conversation immediately and to mute the device quickly when released. Three dedicated buttons also allow you to identify and select groups A, B and C, each associated with an indicator light. The volume can be adjusted across 10 levels directly from the side of the handset.
The handset offers several connection options for audio accessories. A 3.5 mm headphone jack allows the use of headphones fitted with a condenser microphone, whilst the 0B10 connection enables the use of headphones designed specifically for the Solidcom M1 Pro system.
With its compact housing weighing approximately 200 g, removable antennas and dual-injection moulded construction, the Beltpack is designed to withstand regular use in the field. A neck strap is also supplied to keep it securely in place whilst on the move.
To improve intelligibility in busy environments, Hollyland has equipped the handset with a dual-microphone ENC system. The main microphone picks up the user’s voice, whilst a second microphone captures information about ambient noise. On-board processing then uses this data to reduce unwanted noise, with attenuation of up to 20 dB.
Day-to-day use is particularly straightforward. The TALK button allows the user to join the conversation immediately and to mute the device quickly when released. Three dedicated buttons also allow you to identify and select groups A, B and C, each associated with an indicator light. The volume can be adjusted across 10 levels directly from the side of the handset.
The handset offers several connection options for audio accessories. A 3.5 mm headphone jack allows the use of headphones fitted with a condenser microphone, whilst the 0B10 connection enables the use of headphones designed specifically for the Solidcom M1 Pro system.
With its compact housing weighing approximately 200 g, removable antennas and dual-injection moulded construction, the Beltpack is designed to withstand regular use in the field. A neck strap is also supplied to keep it securely in place whilst on the move.
Features
Weight
200 g
Power supply
Rechargeable battery
Connectors
Lemo 3
Packaging
Single unit
Other features
-
Hollyland Solidcom M1 Pro
-
Wireless beltpack intercom
-
Communication: Full-duplex
-
Frequency band: 1.9 GHz
-
Line-of-sight (LOS) range: up to 400 m
-
Modulation: GFSK
-
Transmission power: < 21 dBm
-
Receiver sensitivity: ≤ -93 dBm
-
Bandwidth: 1.728 MHz
-
Frequency response with ENC disabled: 150 Hz – 7 kHz, ±6 dB
-
Frequency response with ENC enabled: 150 Hz – 7 kHz, ±10 dB
-
Signal-to-noise ratio: 60 dB ±2
-
Distortion: < 1 %
-
ENC noise reduction: up to 20 dB
-
Headphone jack: 3.5 mm
-
Headphone interface: 0B10
-
Interface: USB-C
-
Power supply: 1,500 mAh lithium-polymer battery
-
Battery life: up to 6 hours
-
Power consumption: < 0.65 W
-
Volume control: 10 levels
-
Groups: A, B and C
-
Antenna: removable
-
Operating temperature: 0 °C to 45 °C
-
Storage temperature: -20 °C to 60 °C
-
Dimensions: 105 × 65 × 22.4 mm
-
Weight: 200 g
