FILTER
FILTER
IK Multimédia - ToneX Board
New
915,83 €
excl VAT
including eco-part : 0,90 €
In Stock
Shippable immediately
+infos
Guarantee 3
years
The ToneX Board from IK Multimedia combines TONEX amp, speaker and pedal simulations, over 70 AmpliTube effects and two parallel AMP/CAB/FX paths. Its 5-inch colour touchscreen, five encoders and Preset, Scene and Stomp modes make managing sounds a breeze. The USB-C audio interface, audio inputs and outputs, low latency and flexible channel management make it suitable for use both in the studio and on stage.
ARTICLE N° 125929
Presentation
IK Multimedia presents the ToneX Board, a multi-effect pedalboard designed in Italy that combines TONEX and AmpliTube technologies to provide access to a wide range of sounds in a single unit. Thanks to AI Machine Modelling technology, it allows users to access samples of amps, cabinets and pedals, with over 60,000 samples available on ToneNET. Added to this are over 70 effects from AmpliTube, allowing you to create set-ups tailored to every application.
The ToneX Board enables you to build complex signal chains using two parallel AMP/CAB/FX paths, up to 12 effects slots, as well as splitters and mixers. Preset, Scene and Stomp modes make it easy to manage your sounds in the studio, during rehearsals or on stage. Up to 1,400 presets can be organised into 12 setlists and 60 banks of 3 presets.
Its 5-inch colour touchscreen and 5 encoders provide direct access to settings. The stereo input is suitable for guitars and basses, whilst the XLR and TRS outputs, effects loop, MIDI and expression pedal inputs offer a range of connection options.
In the studio, the ToneX Board also functions as a 4-in/2-out audio interface with direct monitoring via USB-C. The 24-bit/192 kHz converters, the frequency response of 5 Hz to 24 kHz and the dynamic range of 123 dB round off this package, designed to support musicians in a variety of set-ups.
The ToneX Board enables you to build complex signal chains using two parallel AMP/CAB/FX paths, up to 12 effects slots, as well as splitters and mixers. Preset, Scene and Stomp modes make it easy to manage your sounds in the studio, during rehearsals or on stage. Up to 1,400 presets can be organised into 12 setlists and 60 banks of 3 presets.
Its 5-inch colour touchscreen and 5 encoders provide direct access to settings. The stereo input is suitable for guitars and basses, whilst the XLR and TRS outputs, effects loop, MIDI and expression pedal inputs offer a range of connection options.
In the studio, the ToneX Board also functions as a 4-in/2-out audio interface with direct monitoring via USB-C. The 24-bit/192 kHz converters, the frequency response of 5 Hz to 24 kHz and the dynamic range of 123 dB round off this package, designed to support musicians in a variety of set-ups.
Other features
-
IK Multimedia ToneX Board
-
Multi-effect pedalboard
-
Technology: AI Machine Modelling
-
Captures available: over 60,000 on ToneNET
-
Captures: amps, speakers and pedals
-
Built-in effects: over 70 effects from AmpliTube
-
Simultaneous sound models: up to 4 per preset
-
Architecture: 2 parallel AMP/CAB/FX paths
-
Effect slots: up to 12
-
Routing: splitters and mixers for complex chains
-
Modes: Preset, Scene and Stomp
-
Storage: up to 1,400 presets
-
Organisation: 12 setlists and 60 banks of 3 presets
-
Display: 5-inch high-resolution colour touchscreen
-
Controls: 5 encoders
-
Latency: very low
-
Audio input: stereo
-
Input compatibility: guitars, basses, keyboards, synthesisers and external devices
-
Outputs: 2 independent stereo outputs
-
Outputs 1 and 2: XLR
-
Outputs 3 and 4: TRS
-
Effects loop: stereo via 2 × 6.35 mm jacks
-
Loop configuration: one stereo loop or two mono loops
-
Loop position: flexible within the signal chain
-
MIDI: input/output via 2 DIN sockets
-
External control: 2 inputs for expression or control pedals
-
USB: USB-C
-
Audio interface: 4 inputs / 2 outputs
-
Monitoring: direct
-
Converters: 24-bit / 192 kHz
-
Frequency response: 5 Hz to 24 kHz
-
Dynamic range: 123 dB
-
Software: TONEX Librarian
-
Included software: TONEX 2.0 MAX and AmpliTube 5 MAX
-
Included: mains adapter and USB cable
-
Country of manufacture: Italy
-
Dimensions: 235 x 184 x 72 mm
-
Weight: 1.6 kg
To find out more...
A guitarist or bassist can use the ToneX Board in rehearsal or on stage by selecting their sounds using the Preset, Scene or Stomp modes. They can incorporate TONEX samples and AmpliTube effects into their signal chains, connect their instrument to the stereo input, and then use the XLR or TRS outputs to feed into their PA system. In the studio, the USB-C port also allows the ToneX Board to be used as a 4-in/2-out audio interface with direct monitoring.
You may also like
Spotlight on
Equivalent products
Tops of the brand
IK Multimédia - ToneX Board
915,83 € excl VAT