Klotz - Câble multipaires TASCAM loom 8 canaux analogiques D-Sub 25p. mâle - 8x Jack 6.35mm 3p. mâle 5m
199,17 €
excl VAT
including eco-part : 0,05 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Louis
Do you need help?
Multicore
TASCAM™ loom 8 channel stereo analogue D-Sub 25p. male - 8x Jack 6.35mm 3p. male 5m KLOTZ multipair cable, highly flexible octopair stereo for studios, XLPE (braided polyethylene) insulation.
ARTICLE N° 83871
Presentation
This 1m, 8-channel analogue multipair cable offers a simple and perfect solution for your cabling.
Designed from a professional PolyWIRE multipair cable, benefiting from a low capacitance of 85 pF/m and a conductive cross-section of 0.22 mm², it offers very high sound quality! This design is combined with a 25-pin D-Sub Male connector of TASCAM™ DA88 analogue standard. This cable can therefore be used in the majority of studio environments with peripherals of this type (recorder, console, rack or interface equipment...). Note that this connector is also suitable for YAMAHA, MACKIE, Digidesign and Focusrite products.
The individual channels are connected by 8 Amphenol 6.35mm male jack connectors. Each strand of the splice is surrounded by a braided sleeve with self-extinguishing properties. The gold- and silver-plated contacts, depending on the connectors, guarantee good conductivity and limit corrosion. Finally, the cable has a transparent heat-shrink sleeve at the ends for durable labelling.
Designed from a professional PolyWIRE multipair cable, benefiting from a low capacitance of 85 pF/m and a conductive cross-section of 0.22 mm², it offers very high sound quality! This design is combined with a 25-pin D-Sub Male connector of TASCAM™ DA88 analogue standard. This cable can therefore be used in the majority of studio environments with peripherals of this type (recorder, console, rack or interface equipment...). Note that this connector is also suitable for YAMAHA, MACKIE, Digidesign and Focusrite products.
The individual channels are connected by 8 Amphenol 6.35mm male jack connectors. Each strand of the splice is surrounded by a braided sleeve with self-extinguishing properties. The gold- and silver-plated contacts, depending on the connectors, guarantee good conductivity and limit corrosion. Finally, the cable has a transparent heat-shrink sleeve at the ends for durable labelling.
Features
Symmetrical
Yes
Length (m)
5
Connectors
D-Sub 25, Jack male Stéréo
Other features
-
Multipair cable TASCAM™ loom 8 analogue stereo channels D-Sub 25p. male - 8x Jack 6.35mm male 5m KLOTZ
-
Reference : TAN08DPA05.0
-
Cable type :
-
PolyWIRE PW08X, Ø 0.22 mm² conductor cross-section
-
Outside diameter: 12.5 mm
-
Capacitance of 85 pF/m
-
Highly flexible octopolar stereo for studios
-
XLPE insulation (braided polyethylene)
-
Splice length: 400 mm
-
Connectors :
-
D-Sub 25p. male, metal body, gold contacts
-
8x 6.35mm 3p. male jack, silver contacts, Amphenol
-
Pinout to AES59 standard
-
Screw connection: UNC 4-40 + M 2.5
-
Sheath: PVC,
-
Cable colour: black
-
Length: 5m
-
Suitable for TASCAM™, MACKIE, YAMAHA, FOCUSRITE...
-
Additional M 2.5 screw for YAMAHA (Europa)
To find out more...
KLOTZ PolyWIRE has been a best-seller for years in the field of studio connections or as a cable for fixed installations. Thanks to the use of a special PVC, the cable is
flexible and lies flat without looping during installation or removal. The generous cross-section combined with the low capacitance
is the basis for good audio performance. Numbered pair sleeves make installation easy and eliminate the need for any other cable marking. For the latest generation of cable, the
conductor is insulated with cross-linked polyethylene, making shrinkage during soldering almost impossible.
flexible and lies flat without looping during installation or removal. The generous cross-section combined with the low capacitance
is the basis for good audio performance. Numbered pair sleeves make installation easy and eliminate the need for any other cable marking. For the latest generation of cable, the
conductor is insulated with cross-linked polyethylene, making shrinkage during soldering almost impossible.
