Klotz - Câble multipaires TASCAM loom 8 canaux stéréo analogique D-Sub 25p. mâle - 8x XLR 3p. mâle 10m KLOTZ
240,83 €
excl VAT
including eco-part : 0,05 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Louis
Do you need help?
Multicore
TASCAM™ loom 8 channel stereo analogue D-Sub 25p. male - 8x XLR 3p. male 10m KLOTZ multipair cable, highly flexible octopair stereo for studios, XLPE (braided polyethylene) insulation.
ARTICLE N° 83822
Presentation
This 10m, 8-channel analogue multipair cable is the perfect solution for overcoming any cabling challenge with ease.
Based on a professional PolyWIRE multipair cable, it features a low capacitance of 85 pF/m and a conductor cross-section of 0.22 mm², delivering excellent sound quality! This design combines with a TASCAM™ DA88 analogue standard 25-pin D-Sub Male connector. This means it can be connected to virtually any studio environment with peripherals of this type (recorder, console, rack or interface equipment...). Note that this connector is also suitable for YAMAHA, MACKIE, Digidesign and Focusrite products.
Individual channels are connected via 8 high-quality Neutrik XLR male connectors. To prevent accidents in the event of overheating, each strand of the splice is surrounded by a braided sheath with self-extinguishing properties. The gold- and silver-plated contacts, depending on the connector, guarantee good conductivity and reliable protection against corrosion. Finally, the outer sheath features a transparent heat-shrink sleeve at both ends for durable labelling.
Based on a professional PolyWIRE multipair cable, it features a low capacitance of 85 pF/m and a conductor cross-section of 0.22 mm², delivering excellent sound quality! This design combines with a TASCAM™ DA88 analogue standard 25-pin D-Sub Male connector. This means it can be connected to virtually any studio environment with peripherals of this type (recorder, console, rack or interface equipment...). Note that this connector is also suitable for YAMAHA, MACKIE, Digidesign and Focusrite products.
Individual channels are connected via 8 high-quality Neutrik XLR male connectors. To prevent accidents in the event of overheating, each strand of the splice is surrounded by a braided sheath with self-extinguishing properties. The gold- and silver-plated contacts, depending on the connector, guarantee good conductivity and reliable protection against corrosion. Finally, the outer sheath features a transparent heat-shrink sleeve at both ends for durable labelling.
Features
Symmetrical
Yes
Connectors
D-Sub 25, XLR male 3 pins
Other features
-
Multipair cable TASCAM™ loom 8 analogue stereo channels D-Sub 25p. male - 8x XLR male 10m KLOTZ
-
Reference : TAN08DM10.0
-
Cable type:
-
PolyWIRE PW08X, Ø 0.22 mm² conductor cross-section.
-
Outside diameter: 12.5 mm
-
Capacitance of 85 pF/m
-
Highly flexible octopolar stereo for studios
-
XLPE insulation (braided polyethylene)
-
Splice length: 400 mm
-
Connectors :
-
D-Sub 25p. male, metal body, gold-plated contacts
-
XLR 3p. - bright bronze metal body, silver-plated contacts
-
Pinout according to AES59 standard
-
Screw connection: UNC 4-40 + M 2.5
-
Sheath: PVC,
-
Cable colour: black
-
Length: 10m
-
Suitable for TASCAM™, MACKIE, YAMAHA, FOCUSRITE...
-
Additional M 2.5 screw for YAMAHA (Europa)
To find out more...
KLOTZ PolyWIRE has been a best-seller for years in the field of studio connections or as a cable for fixed installations. Thanks to the use of a special PVC, the cable is
flexible and lies flat without looping during installation or removal. The generous cross-section combined with the low capacitance
is the basis for good audio performance. Numbered pair sleeves make installation easy and eliminate the need for any other cable marking. For the latest generation of cable, the
conductor is insulated with cross-linked polyethylene, making shrinkage during soldering almost impossible.
flexible and lies flat without looping during installation or removal. The generous cross-section combined with the low capacitance
is the basis for good audio performance. Numbered pair sleeves make installation easy and eliminate the need for any other cable marking. For the latest generation of cable, the
conductor is insulated with cross-linked polyethylene, making shrinkage during soldering almost impossible.
