Klotz - Multipaires TASCAM 8 canaux D-Sub 25 mâle / 8x XLR 3p. mâle 3m
199,17 €
excl VAT
including eco-part : 0,05 €
Out of stock
Contact us for delivery times
Guarantee 3
years
Anais
Louis
Do you need help?
Multicore
TASCAM™ loom 8 channel stereo analogue D-Sub 25p. male - 8x XLR 3p. male 3m KLOTZ multipair cable, highly flexible octopair stereo for studios, XLPE (braided polyethylene) insulation.
ARTICLE N° 83813
Presentation
This 3m, 8-channel analogue multipair cable offers an ideal solution for overcoming your cabling challenges with ease.
Designed from a professional PolyWIRE multi-pair cable, it benefits from a low capacitance of 85 pF/m and a conductive cross-section of 0.22 mm² that deliver excellent sound quality! This design is combined with a TASCAM™ DA88 analogue standard 25-pin D-Sub Male connector. This cable can therefore be used in almost any studio environment with peripherals of this type (recorder, console, rack or interface equipment...). Note that this connector is also suitable for YAMAHA, MACKIE, Digidesign and Focusrite products.
The individual channels are connected by 8 Neutrik XLR male connectors, renowned for their quality. Each strand of the splice is encased in a braided sleeve with self-extinguishing properties to prevent accidental overheating. The gold- and silver-plated contacts, depending on the connector, provide good conductivity and long-lasting protection against corrosion. Finally, the outer sheath has a transparent heat-shrink sleeve at both ends for easy labelling.
Designed from a professional PolyWIRE multi-pair cable, it benefits from a low capacitance of 85 pF/m and a conductive cross-section of 0.22 mm² that deliver excellent sound quality! This design is combined with a TASCAM™ DA88 analogue standard 25-pin D-Sub Male connector. This cable can therefore be used in almost any studio environment with peripherals of this type (recorder, console, rack or interface equipment...). Note that this connector is also suitable for YAMAHA, MACKIE, Digidesign and Focusrite products.
The individual channels are connected by 8 Neutrik XLR male connectors, renowned for their quality. Each strand of the splice is encased in a braided sleeve with self-extinguishing properties to prevent accidental overheating. The gold- and silver-plated contacts, depending on the connector, provide good conductivity and long-lasting protection against corrosion. Finally, the outer sheath has a transparent heat-shrink sleeve at both ends for easy labelling.
Features
Symmetrical
Yes
Length (m)
3
Connectors
D-Sub 25, XLR male 3 pins
Other features
-
Multipair cable TASCAM™ loom 8 analogue stereo channels D-Sub 25p. male - 8x XLR male 3m KLOTZ
-
Reference : TAN08DM03.0
-
Cable type:
-
PolyWIRE PW08X, Ø 0.22 mm² conductor cross-section.
-
Outside diameter: 12.5 mm
-
Capacitance of 85 pF/m
-
Highly flexible octopolar stereo for studios
-
XLPE insulation (braided polyethylene)
-
Splice length: 400 mm
-
Connectors :
-
D-Sub 25p. male, metal body, gold-plated contacts
-
XLR 3p. - bright bronze metal body, silver-plated contacts
-
Pinout according to AES59 standard
-
Screw connection: UNC 4-40 + M 2.5
-
Sheath: PVC,
-
Cable colour: black
-
Length: 3m
-
Suitable for TASCAM™, MACKIE, YAMAHA, FOCUSRITE...
-
Additional M 2.5 screw for YAMAHA (Europa)
To find out more...
KLOTZ PolyWIRE has been a best-seller for years in the field of studio connections or as a cable for fixed installations. Thanks to the use of a special PVC, the cable is
flexible and lies flat without looping during installation or removal. The generous cross-section combined with the low capacitance
is the basis for good audio performance. Numbered pair sleeves make installation easy and eliminate the need for any other cable marking. For the latest generation of cable, the
conductor is insulated with cross-linked polyethylene, making shrinkage during soldering almost impossible.
flexible and lies flat without looping during installation or removal. The generous cross-section combined with the low capacitance
is the basis for good audio performance. Numbered pair sleeves make installation easy and eliminate the need for any other cable marking. For the latest generation of cable, the
conductor is insulated with cross-linked polyethylene, making shrinkage during soldering almost impossible.
