Klotz - DX10, DI passive
138,33 €
excl VAT
including eco-part : 0,07 €
In Stock
Shippable immediately
+infos
Guarantee 5
years
Anais
Tristan
Do you need help?
DI Box
Klotz DX10, passive DI box, high-quality construction.
ARTICLE N° 88131
Presentation
The KLOTZ DX10 passive direct box is the successor to the D10KL.
The KLOTZ DX10 is used to convert a high-impedance unbalanced signal into a low-impedance balanced signal, while maintaining exceptional linearity.
Like all passive DIs, no external power supply is required.
The KLOTZ DX10 passive's transformer is hand-wired with 100% mu-metal (Permalloy) shielding made from a soft magnetic nickel-iron alloy with excellent permeability (magnetic conductivity).
This transformer was developed in-house by KLOTZ and has a transmission ratio of 6+6:1.
The Klotz DX10 passive DI-Box guarantees a much more stable and neutral sound than its competitors.
The KLOTZ DX10 is used to convert a high-impedance unbalanced signal into a low-impedance balanced signal, while maintaining exceptional linearity.
Like all passive DIs, no external power supply is required.
The KLOTZ DX10 passive's transformer is hand-wired with 100% mu-metal (Permalloy) shielding made from a soft magnetic nickel-iron alloy with excellent permeability (magnetic conductivity).
This transformer was developed in-house by KLOTZ and has a transmission ratio of 6+6:1.
The Klotz DX10 passive DI-Box guarantees a much more stable and neutral sound than its competitors.
Features
Active / passive
Passive
Input channels
1
Multichannel
No
Format converter
No
Packaging
Single unit
Country of production
Germany
Other features
-
Klotz DX10
-
Case: robust, all-metal shell (stainless steel), with wear-resistant laser engraving
-
Thru output for driving a guitar amp
-
Hand-wired transformer with mu-metal (Permalloy) shielding for improved RF isolation
-
Dimensions: 103 x 75 x 49mm
-
Unbalanced input and outputs on 6.35 mm jacks
-
Balanced output on XLR 3p. Male
-
Ground Lift switch
-
Max. input level at attn. OFF : +10 dBu (2.5 V) / 20 kΩ
-
Max. input level at attn. 20: +30 dBu (25 V) / 40 kΩ
-
Max. output level 10 dBu (250 mV) / 200 kΩ
-
Frequency response: 10 Hz - 30 kHz (+/- 0.3 dB)
-
max. input level attn. Off: +10 dBu (2.5 V) / 20 kΩ
-
Harmonic distortion: <0.1
-
Hand-made in Germany
-
Manufacturer's warranty: 5 years
To find out more...
The abbreviation "DI" stands for "Direct Injection" and describes the capture of the pure, direct signal from the instrument. In the KLOTZ DX10 DI-Box, the signal is balanced so that it can be transmitted over long distances without unpleasant background noise, fed into a mixing console and processed further.
The KLOTZ AIS factory uses 6-fold quality assurance for every KLOTZ cable in accordance with ISO 9001:2015.
The KLOTZ AIS factory uses 6-fold quality assurance for every KLOTZ cable in accordance with ISO 9001:2015.
