Q Acoustics - Q SUB100 Blanc
New
729,17 €
excl VAT
Out of stock
Guarantee 3
years
Jessie
Louis
Do you need help?
Hifi Subwoofers
The Q SUB100 White from Q Acoustics is a 10" active subwoofer designed to enhance any hi-fi or home cinema installation. Its 500 W peak amplification, combined with a closed Infinite Baffle design, delivers precise, well-controlled bass, perfectly suited to medium-sized rooms. Integrated DSP processing automatically optimises integration with your speakers and adjusts the level according to the source, for immediate sonic coherence.
ARTICLE N° 122513
Presentation
Q Acoustics presents the Q SUB100 Satin White, a subwoofer designed to effectively complement a hi-fi or home cinema system by providing bass extension suitable for 2.1, 5.1 or 7.2 configurations. Its 254 mm driver is housed in a closed Infinite Baffle enclosure for tight, controlled bass, while the absence of a vent makes it easy to place close to a wall or piece of furniture.
Integrated digital signal processing (DSP) plays a central role in the SUB100's operation, automatically detecting the type and level of the incoming signal in order to adjust the gain and optimise performance according to the source used. This electronic management also simplifies integration with different loudspeakers, thanks to a low-pass filter adjustable from 40 to 250 Hz, delay settings and phase inversion.
The digital amplifier developed by Q Acoustics uses a four-stage PBTL architecture to improve driver control while limiting heat dissipation and distortion. The SUB100 achieves 250W continuous and 500W peak with a claimed harmonic distortion of just 0.09%.
Its high-density MDF construction with a reinforced 36 mm front panel helps to limit parasitic vibrations and maintain the cabinet's stability under high acoustic pressure. Its compact size and Satin White finish make it easy to fit into a living room or dedicated room.
Integrated digital signal processing (DSP) plays a central role in the SUB100's operation, automatically detecting the type and level of the incoming signal in order to adjust the gain and optimise performance according to the source used. This electronic management also simplifies integration with different loudspeakers, thanks to a low-pass filter adjustable from 40 to 250 Hz, delay settings and phase inversion.
The digital amplifier developed by Q Acoustics uses a four-stage PBTL architecture to improve driver control while limiting heat dissipation and distortion. The SUB100 achieves 250W continuous and 500W peak with a claimed harmonic distortion of just 0.09%.
Its high-density MDF construction with a reinforced 36 mm front panel helps to limit parasitic vibrations and maintain the cabinet's stability under high acoustic pressure. Its compact size and Satin White finish make it easy to fit into a living room or dedicated room.
Features
Weight
16,7 kg
Finish
Satin
Speaker
10"
Packaging
Single unit
Color
White
Other features
-
Q Acoustics Q SUB100 White
-
Active subwoofer
-
Load: Infinite Baffle (closed)
-
Speaker: 254 mm (10")
-
Effective internal volume: 23.5 litres
-
Frequency response (-6 dB): 32 Hz - 250 Hz
-
Adjustable crossover frequency: 40 Hz - 250 Hz
-
Max SPL at 1 m: 111 dB
-
Continuous amp power: 250 W
-
Peak amplifier power: 500 W
-
THD at rated power: 0.09
-
Input sensitivity (max gain): 300 mV RMS
-
Maximum input level: 2.1 V RMS
-
Input impedance: 20 kΩ
-
Noise floor (A-weighted): 50 μV
-
Integrated DSP: yes
-
Settings: delay, phase inversion, low-pass filter
-
Amplification: 4-stage PBTL digital module
-
Cabinet construction: 18 mm high-density MDF with 36 mm front panel
-
Finish: White Satin
-
Supplied accessories: spikes, counter spikes, mains cable, user manual
-
Dimensions: 350 x 350 x 382 mm
-
Weight: 16.7 kg
To find out more...
Low-frequency extension for stereo hi-fi systems, active speakers or 2.1, 5.1 and 7.2 home cinema systems.
