Radial - MC3 v2
415,83 €
In Stock
Usually shipped within 48h
+infos
Warranty 3 years
Antonin
Tristan
Need help ?
Monitoring Accessories
Passive monitoring controller, switcher liabilities and headphone amplifier designed for studios and home studios. It incorporates a monitoring speakers management system, subs and helmets.
ARTICLE N° 54437
Specifications
-
Radial Engineering MC3 v2
-
Controller passive speakers
-
Circuit Type Passive stereo with sub and HP
-
assets Frequency response DC ~ 20kHz (+ 0dB / 1dB)
-
Common Mode Rejection Ratio: -51dB @ 55Hz
-
114dB dynamic range
-
Noise Stereo: -108dBu; Sub: -95dBu; helmet: -87dBu
-
max Input + 14dBu
-
Harmonic Distortion 0.001% @ 1kHz / 0dBu output
-
intermodulation distortion 0.001% @ 1kHz / 0dB output
-
Input impedance 4.4k Ohms Ohms balanced / 2.2k ohms asymmetric
-
output impedance varies depending on the level
Presentation
The MC3 is a passive monitoring controller that enables studios to produce mobile or small, to have access to a cost effective high performance system for management headsets and speakers.
Studios today must be able to work in all environments, for example the final reading can occur on the earphones, headphones, televisions, computers, games, radios, etc ...
Juggling all these destinations can quickly be problematic for a current digital setup. Radial MC3 is a device that enables studios to easily accommodate all kinds of situations. It will be much easier for an engineer to quickly switch its DAW and transit output to monitors, listening via headphones and be able to enable or disable a sub-woofer.
designed for near-field monitor, MC3 has a switchable symmetric stereo input unbalanced, two stereo outputs for the monitors, an auxiliary output TRS, as well as an output specially dedicated to a sub-woofer .
Studios today must be able to work in all environments, for example the final reading can occur on the earphones, headphones, televisions, computers, games, radios, etc ...
Juggling all these destinations can quickly be problematic for a current digital setup. Radial MC3 is a device that enables studios to easily accommodate all kinds of situations. It will be much easier for an engineer to quickly switch its DAW and transit output to monitors, listening via headphones and be able to enable or disable a sub-woofer.
designed for near-field monitor, MC3 has a switchable symmetric stereo input unbalanced, two stereo outputs for the monitors, an auxiliary output TRS, as well as an output specially dedicated to a sub-woofer .
Information
Number of connectable speaker pairs
2
You may also like
Radial - MC3 v2
Radial - MC3 v2
415,83 €
In Stock
Usually shipped within 48h
+infos
Warranty 3 years
Antonin
Tristan
Need help ?
Similar Products
