Rode - NTG-2
215,83 €
with eco participation: 0,10 €
In Stock
Usually shipped within 3 days
+infos
Warranty 10 years
Jessie
Louis
Need help ?
Broadcast Microphone
RODE NTG-2 Directional Condenser Microphone, light cannon, specially designed for professional applications within the film, video, television and production.
ARTICLE N° 26816
Specifications
-
Professional Sound Quality
-
Solid metal construction
-
Condenser Sensor
-
Reduced weight of about 161 g
-
Circuit with low noise level
-
Low handling noise
-
Comes with pliers in his pocket
-
Designed and manufactured in Australia
-
Guaranteed 2 years
-
Specifications
-
Acoustic Principle: Line gradient more
-
Polar Pattern: Super Cardioid
-
Frequency range: 20 Hz ~ 20,000 Hz high-pass filter at 80 Hz (12 dB / octave)
-
Output Impedance: 250 Ω in phantom power - 350 Ω on battery
-
Signal / noise ratio (DIN / IEC 651): 76 dB (1 kHz rel 1 Pa to IEC 651, IEC 268-15)
-
Equivalent Noise: 18 dB SPL (for IEC 651, IEC 268-15)
-
Maximum SPL: 131 dB (@ 1% THD at 1 kW)
-
Sensitivity at 1 kHz at 1 kW: -36 dB re 1Volt / Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field open circuit)
-
Dynamic Band - amp DIN / IEC 651: 113 dB (to IEC 651, IEC 268-15)
-
Power supply: 1.5 V alkaline battery or phantom power P48
-
Power consumption: 2.0 mA
-
Life of the battery: More than 400 hours with fresh alkaline battery
-
Output connectors: 3-pin XLR, balanced output between pins 2 (+) 3 (-) and 1 (ground)
-
Average weight: 161 grams
Presentation
The NTG-2 provides an output level symmetrized low impedance, and works on both internal 1.5V AA battery for 48 V to the P48 standard.
Its bandwidth and directivity control coupled to the electronic SMT low noise level, make the NTG-2 the perfect choice for the film industry, video and dubbing. Its light weight allows it to be attached easily on a video camera or boom.
The NTG-2 comes with its clip and windscreen that suppresses breath during outdoor recording in normal conditions.
Its bandwidth and directivity control coupled to the electronic SMT low noise level, make the NTG-2 the perfect choice for the film industry, video and dubbing. Its light weight allows it to be attached easily on a video camera or boom.
The NTG-2 comes with its clip and windscreen that suppresses breath during outdoor recording in normal conditions.
Information
Directivity
Supercardioid
Switchable Bass-Cut filter
No
To go further...
The NTG-2 operates with a standard 48V phantom power or an alkaline battery 1.5 volts. He admits a voltage between 44 and 52 V positive polarity between terminals 2 and 3 via the output XLR connector.
Output Impedance
NTG-2 will operate in an optimum manner to a 1k Ohm load impedance. If a load below thereof is employed, the level of the output signal will be reduced.
The output of the NTG-2 is mirrored between pin 2 (hot) 3 (cold) and pin 1 (ground).
Output Impedance
NTG-2 will operate in an optimum manner to a 1k Ohm load impedance. If a load below thereof is employed, the level of the output signal will be reduced.
The output of the NTG-2 is mirrored between pin 2 (hot) 3 (cold) and pin 1 (ground).
Additional documents
You may also like
User's advice
User's advice Broadcast Microphone
NTG-2 Rode
/5
1 User's advice
JEAN CLAUDE D
26/11/2019
5
/5
Purchase Checked
fiabilité
0
0
report
Rode - NTG-2
Rode - NTG-2
215,83 €
with eco participation: 0,10 €
In Stock
Usually shipped within 3 days
+infos
Warranty 10 years
Jessie
Louis
Need help ?
Spotlight on
Rode has been a leader in audio equipment since 1967 and is respected by musicians and recording engineers around the world. From shotgun mics and lavalier mics to accessories such as boom stands and microphone stands, Rode has everything you need to capture an artist's talents on stage or in the studio. Best sellers include the NT1-A condenser mic, for podcasts the NT-USB mini and RodeCaster Pro. For those who want a dynamic microphone, choose the M1. There are also a number of mobile solutions for smartphones and DSLRs, always with professional quality.
