Antelope Audio - Edge 360

The Antelope Audio Edge 360 is a measurement microphone designed to provide a reliable reference for acoustic calibration. Unlike a vocal or instrumental microphone, whose response can be deliberately shaped to achieve a particular tonal character, the Edge 360 prioritises linear response so that measurements reflect the actual behaviour of the room and the listening system as faithfully as possible.

Its 16 mm electret condenser capsule is optimised for measurement applications. It has a truly omnidirectional polar pattern and consistent off-axis response – two essential characteristics when analysing reflections and the acoustic environment around the listening position. Its linear frequency response covers 20 Hz to 20 kHz, encompassing the entire audible range specified by Antelope Audio.

One of the Edge 360’s key features is its individual calibration. Each unit is measured separately and receives a calibration file corresponding to its own serial number. It is therefore not simply a generic file applied to all microphones of that model. The file can be imported into Antelope Room Correction to compensate for any response variations specific to the microphone in use.

The Edge 360 is particularly well-suited to the calibration of studios, home studios, control rooms, monitoring systems and public address installations. With a maximum SPL of 124 dB, it can also be used for high-level measurements, particularly when setting up sound reinforcement systems. Its signal-to-noise ratio of 70 dB also ensures that noise levels remain low enough for measurements in quiet listening environments.

Connection is straightforward via a 3-pin XLR output, and power is supplied via 48 V phantom power. The microphone comes with a standard clip compatible with a microphone stand, a pop filter for outdoor use and a protective carrying case.