B&C Speakers - 18PZB100 8 Ohm Push Buttons
265,83 €
excl VAT
Out of stock
Contact us for delivery times
Guarantee 3
years
Speaker driver
B&C Speakers 18PZB100 8 Ohm Push Buttons, 18" 1400 W driver, 97 dB, waterproof cone and optimal mechanical control for powerful bass.
ARTICLE N° 111586
Presentation
The B&C Speakers 18PZB100 8 Ohm Push Buttons is an 18-inch speaker designed to deliver firm, defined bass, even in the most demanding sound situations. Its 100 mm copper voice coil, capable of handling up to 1400 W in programme mode, ensures powerful, stable reproduction. The engineers have opted for a double silicone spider design to guarantee optimum mechanical control, essential for strong excursions.
With a sensitivity of 97dB and an extended frequency response from 40Hz to 2000Hz, the 18PZB100 stands out for its versatility. Used as a subwoofer or bass reinforcement, it offers balanced dynamics and excellent projection. Its 8 mm Xmax allows controlled excursion, resulting in deep, accurate bass with no noticeable distortion.
Its ferrite magnet motor concentrates a magnetic flux of 1.15 T, guaranteeing high efficiency while maintaining thermal stability over time. The fibreglass design of the coil support enhances reliability and limits the risk of distortion under heavy loads. This robustness makes it the preferred choice for service providers looking for durability and performance.
The radial cone, waterproofed on both sides, offers enhanced resistance to outdoor conditions. Combined with a double-roller suspension system, it ensures smooth, even movement for a full, controlled bass. These technical choices result in a precise sound, even at high volume, with a clarity in the low-midrange rarely achieved by this type of loudspeaker.
With a sensitivity of 97dB and an extended frequency response from 40Hz to 2000Hz, the 18PZB100 stands out for its versatility. Used as a subwoofer or bass reinforcement, it offers balanced dynamics and excellent projection. Its 8 mm Xmax allows controlled excursion, resulting in deep, accurate bass with no noticeable distortion.
Its ferrite magnet motor concentrates a magnetic flux of 1.15 T, guaranteeing high efficiency while maintaining thermal stability over time. The fibreglass design of the coil support enhances reliability and limits the risk of distortion under heavy loads. This robustness makes it the preferred choice for service providers looking for durability and performance.
The radial cone, waterproofed on both sides, offers enhanced resistance to outdoor conditions. Combined with a double-roller suspension system, it ensures smooth, even movement for a full, controlled bass. These technical choices result in a precise sound, even at high volume, with a clarity in the low-midrange rarely achieved by this type of loudspeaker.
Other features
-
B&C Speakers 18PZB100 8 Ohm Push Buttons
-
18" (46 cm) speaker
-
Power 1400 W AES
-
Sensitivity 97 dB 1w/1m
-
Frequency response: 40 Hz - 2 kHz
-
4" (100 mm) copper voice coil
-
Magnet : Ferrite
-
Connectors : Push Buttons
-
Recommended load: 160 litres, tuned to 39 Hz
-
Fs : 30 Hz
-
Qts : 0,24
-
Xmax : 8 mm
-
Suspension : Double roller
-
Radial cone with front/rear waterproof treatment
-
Double silicone spider
-
Repair kit RCK18PZB1008 sold separately
-
Supplier code: ALT18PZB1008M
-
Dimensions : Ø460 x 202 mm
-
Weight : 12,2 kg
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
