B&C Speakers - 21SW115 8 Ohm Recone Kit
159,17 €
excl VAT
In Stock
Usually ships within 15 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Loudspeaker Parts
Give your 21SW115 speaker a second life by restoring it with the B&C Speakers 21SW115 8 Ohm Recone Kit.
ARTICLE N° 111576
Presentation
The B&C Speakers 21SW115 8 Ohm Recone Kit has been designed to restore the full performance of the 21SW115 loudspeaker, an essential reference in high-power subwoofers. It contains all the parts needed to restore the speaker to factory specifications: TWP waterproof radial cone, triple-roll suspension, double silicone spider and a 116 mm copper voice coil mounted on a fibreglass support.
With a power rating of 1700W AES and a continuous output capacity of 3400W, this kit restores the robustness and impact of the original model. Its frequency response of 30 Hz to 1000 Hz and sensitivity of 97 dB guarantee full, accurate reproduction of low frequencies, even at high sound pressure levels.
The 21SW115 is renowned for its powerful motorisation and linear excursion of 14 mm, reinforced by a magnetic flux density of 1.15 T. Thanks to this recone kit, the loudspeaker retains its dynamic range, precision and endurance, essential for professional sound reinforcement applications and touring systems.
With a power rating of 1700W AES and a continuous output capacity of 3400W, this kit restores the robustness and impact of the original model. Its frequency response of 30 Hz to 1000 Hz and sensitivity of 97 dB guarantee full, accurate reproduction of low frequencies, even at high sound pressure levels.
The 21SW115 is renowned for its powerful motorisation and linear excursion of 14 mm, reinforced by a magnetic flux density of 1.15 T. Thanks to this recone kit, the loudspeaker retains its dynamic range, precision and endurance, essential for professional sound reinforcement applications and touring systems.
Other features
-
B&C Speakers 21SW115 8 Ohm Recone Kit
-
Complete speaker repair kit
-
Compatible with: model 21SW115, 8 Ω
-
Components included: waterproof TWP radial cone, triple roll suspension, double silicone spider, 116mm copper voice coil on fibreglass backing, foam gasket, shims, heat shrink tubing
-
Nominal impedance: 8 Ω
-
Resonance frequency: 30 Hz
-
Frequency response: 30 Hz - 1000 Hz
-
Sensitivity: 97 dB
-
Rated power : 1700 W
-
Maximum power: 3400 W
-
Coil diameter: 4.5 inches (116 mm)
-
Linear excursion (Xmax): 14 mm
-
Maximum excursion (Xvar): 16 mm
-
Kit reference: RCK21SW1158
-
Sales unit: 1 Kit
-
ATTENTION: Glue not included
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
