B&C Speakers - Recone Kit 8NDL51 8 Ohm
54,17 €
excl VAT
In Stock
Usually ships within 15 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Loudspeaker Parts
The Recone Kit 8NDL51 8 Ohm from B&C Speakers allows you to restore an 8" neodymium speaker to its original state while preserving its original performance. A must-have for extending the life of your professional transducers.
ARTICLE N° 106360
Presentation
The Recone Kit 8 NDL 51 8 Ohm from B&C Speakers offers a reliable and cost-effective solution for giving your 8NDL51 8 Ohm loudspeaker a second lease of life. Designed to restore your loudspeaker to exactly its original acoustic characteristics, this replacement kit includes all the components needed for a complete, factory-built repair.
It includes the cone waterproofed on both sides, the 51mm copper voice coil mounted on a fibreglass support, the double-roll suspension, the original spider and all the accessories required for assembly.
Once installed, this recone delivers the same response curve, the same 94dB sensitivity, and the same power handling capacity: 200W AES, 400W programme.
Compatible with 14-litre bass-reflex loads tuned to 65 Hz, the driver in question covers a bandwidth of 65 Hz to 3 kHz with good linearity. With its exponential diaphragm and compact neodymium motor, the 8NDL51 is frequently used in compact two-way speakers, stage monitors or array systems.
In the event of mechanical failure (damaged cone, burnt coil, etc.), this Recone Kit is the manufacturer's recommended solution for a return to original performance, without modification.
For service providers, integrators or sound technicians looking for a reliable kit, the Recone Kit 8NDL51 8 Ohm is available individually from Sonovente.com. A simple and effective way of ensuring the longevity of your loudspeakers.
It includes the cone waterproofed on both sides, the 51mm copper voice coil mounted on a fibreglass support, the double-roll suspension, the original spider and all the accessories required for assembly.
Once installed, this recone delivers the same response curve, the same 94dB sensitivity, and the same power handling capacity: 200W AES, 400W programme.
Compatible with 14-litre bass-reflex loads tuned to 65 Hz, the driver in question covers a bandwidth of 65 Hz to 3 kHz with good linearity. With its exponential diaphragm and compact neodymium motor, the 8NDL51 is frequently used in compact two-way speakers, stage monitors or array systems.
In the event of mechanical failure (damaged cone, burnt coil, etc.), this Recone Kit is the manufacturer's recommended solution for a return to original performance, without modification.
For service providers, integrators or sound technicians looking for a reliable kit, the Recone Kit 8NDL51 8 Ohm is available individually from Sonovente.com. A simple and effective way of ensuring the longevity of your loudspeakers.
Other features
-
B&C Speakers 8NDL51 Recone Kit
-
Complete speaker repair kit
-
Compatible with: model 8NDL51, 8 Ω
-
Components included: radial cone, bonnet, silicone suspensions, foam gasket, shims, heat shrink tubing
-
Nominal impedance: 8 Ω
-
Resonant frequency: 66 Hz
-
Frequency response: 65 Hz - 3000 Hz
-
Reference of the kit : RCK008NDL518
-
Sales unit: 1 Kit
-
ATTENTION: Glue not included
You may also like
Spotlight on
The market leader in speakers and hp drivers, B&C Speakers is the reflection of a brand that always listens to demand and does so with a major concern for innovation and sharp quality control, which allows it to always be present with the largest manufacturers of professional sound reinforcement speakers such as NEXO, LACOUSTICS and FBT.
