Electro-Voice - RE3-ACC-AASP 2I8 Antenna Splitter
569,17 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 10 days
+infos
Guarantee 3
years
HF System Accessories
A professional, high-bandwidth, active antenna splitter, AASP is designed to function as an RF and DC power distribution hub on a multi-channel wireless microphone system. It actively splits each incoming antenna signal (A and B) into four connected diversity receivers on the system without signal loss, and supplies DC power to each of the four connected receivers.
ARTICLE N° 87532
Presentation
In addition to the four RF outputs per antenna, the AASP splitter features a convenient cascaded output per antenna, allowing incoming signals to be sent directly to another AASP unit without any loss, and without sacrificing any of the four RF outputs on either side.
A total of five AASP splitters can be cascaded from one pair of antennas.
The selectable amplifier power supply supplies the active antennas and/or power amplifiers with 12 Vdc.
The default setting is on and, should the need arise to disable the amplifier power supply, an on/off switch is accessible on the main circuit board inside the chassis.
A total of five AASP splitters can be cascaded from one pair of antennas.
The selectable amplifier power supply supplies the active antennas and/or power amplifiers with 12 Vdc.
The default setting is on and, should the need arise to disable the amplifier power supply, an on/off switch is accessible on the main circuit board inside the chassis.
Features
Carrier frequencies
470 MHz ⭢ 960 MHz
19" rack
1U, Kit 19" included
Power supply
Power adapter (included)
Accessory Type
Antenna Splitter / Combiner
Other features
-
Electro-Voice RE3-ACC-AASP
-
2I8 Antenna Splitter
-
Active antenna splitter 2 inputs x 8 outputs
-
UHF bandwidth: 10 MHz - 1000 MHz
-
RF output gain: 3 dB (± 2 dB)
-
Cascade output level: 0 dB - +2 dB
-
Output connection isolation: 25 dB
-
Third-order intercept point: 24 dBm
-
Impedance: 50 Ω
-
Input voltage: 12 Vdc/5 A
-
DC output voltage: +12 V 1 A x 4
-
Antenna amplifier DC voltage: 12 V
-
Connectors: BNC
-
Power supply: mains adapter supplied
-
Dimensions: 481 x 227 x 43 mm
-
Weight: 3.1 kg
To find out more...
- External antenna splitter with 2 inputs x 8 active outputs
- Supplies DC power to four receivers
- Splits two antennas into four diversity receivers
- Selectable amplifier power to power active antennas and amplifiers
- Additional cascade output per antenna allows splitters to be stacked without sacrificing 2x8 functionality
- Supplies DC power to four receivers
- Splits two antennas into four diversity receivers
- Selectable amplifier power to power active antennas and amplifiers
- Additional cascade output per antenna allows splitters to be stacked without sacrificing 2x8 functionality
