Elokance - Tower 10

The elokance Tower 10 is a 3-way active column speaker system designed for musicians, mobile DJs, entertainers and event caterers. It combines speakers, amplification and signal processing in a configuration that is easy to transport and set up. This allows you to quickly set up a complete sound system for a wedding, a cocktail party, a conference, an acoustic concert or a dance party.

Its cabinet houses a 10-inch speaker with a 2-inch voice coil and a ferrite motor. It adds weight to the bass lines, impact to the kick drums and a solid foundation to the musical accompaniment. The frequency response extends down to 38 Hz at -10 dB, which allows the Tower 10 to maintain a balanced sound without immediately requiring the addition of a second subwoofer.

The tower uses six 3-inch drivers to reproduce the midrange. These bring out vocals, guitars, keyboards and the essential elements of the mix. Above these, a high-frequency driver with a 1.8-inch diaphragm, 1-inch voice coil and neodymium magnet reproduces detail and attack up to 20 kHz.

This 3-way design ensures that a single driver is not required to handle everything at once. Each section handles a specific part of the frequency spectrum, resulting in clearer sound reproduction as the volume increases.

The Tower 10 has a horizontal dispersion of 100° and a vertical dispersion of 40° above 1 kHz. This wide dispersion allows the speaker to cover a venue without concentrating all the sound into a narrow corridor in front of the stage. Guests seated at the sides can therefore enjoy the performance without having to move towards the centre of the dance floor.

The bi-amplified Class D amplifier delivers 800 W RMS, split between 500 W and 300 W. Peak power can reach 2,000 W, with a maximum rated level of 129 dB SPL. This gives you sufficient power reserves for small and medium-sized events, whilst retaining a system that is easier to move than a traditional front-of-house setup comprising several separate components.

The built-in DSP handles general signal processing and coordinates the three channels. To play a playlist, background music or hold music, Bluetooth 5.3 allows you to quickly connect a compatible smartphone, tablet or computer.

The TWS function is used to pair two Tower 10 units without a wired audio connection between the systems. You can then create a wider stereo soundfield, which is useful for flanking a stage, a dance floor or a reception area.

The connectivity options cater for standard set-ups. The XLR/6.35 mm jack combo input accommodates a microphone or a line-level source. The RCA and 3.5 mm mini-jack sockets allow you to connect an external player. An XLR output is also available for transmitting the signal to other sound system equipment.

The birch plywood cabinet provides a rigid base for the whole unit. The ABS column sections ensure it remains easy to handle. The complete system weighs 25.2 kg, of which 17.5 kg is the cabinet.

A cover protects the cabinet during transport, whilst a separate bag holds the column components. Everything has therefore been designed to ensure your new sound system doesn’t end up on its first journey wedged between a folding table and three stubborn lighting stands.