LD SYSTEMS - MAUI 66 G3 Black
The LD Systems MAUI 66 G3 column loudspeaker system features a true 4-way design for performances where power and precision must go hand in hand. Its subwoofer extends very low down, the midrange retains excellent presence even at the highest volumes, and the high frequencies remain clear across a wide listening area. The column’s cardioid dispersion pattern minimises rear spill, whilst digital processing ensures precise signal control.
Presentation
The subwoofer extends down to 28 Hz thanks to the 18-inch driver and the deep-tuned bass-reflex port. The elliptical ports optimise airflow and reduce unwanted noise, whilst the die-cast aluminium chassis and polyurea-coated birch cabinet ensure a robust construction.
The midrange section utilises 16 3.5-inch neodymium drivers, with additional drivers positioned above the tweeter motors. This arrangement significantly extends the midrange response and improves the coverage of the sound field across the listening area. The lower midrange drivers, which are horn-loaded, enhance the coherence of the sound wavefront, offering greater sensitivity and headroom.
For high frequencies, four 1-inch compression drivers work in conjunction with BEM-optimised waveguides and tailored phase plugs. The 120 x 25° directivity ensures even coverage across the listening area within the venue. The curved waveguides also maintain consistent dispersion, delivering precise reproduction, good spatial continuity and reduced distortion when the system is operating at high levels.
The cardioid polar pattern provides up to 18 dB of rear attenuation between 100 Hz and 1 kHz, to control the energy radiated behind the column. The second-generation DynX DSP incorporates limiters to keep the signal under control at high levels.
The subwoofer and column are connected wirelessly, with automatic column detection. Bluetooth 5.4 supports AAC and aptX codecs for direct, very high-quality audio streaming.
Features
Other features
-
LD Systems MAUI 66 G3
-
Column sound system
-
Peak power: 3,800 W
-
Maximum SPL: 135 dB
-
Frequency response: 28 Hz ⭢ 20 kHz
-
Directivity: H120° x V25°
-
Cardioid column
-
Rear attenuation ≤18 dB
-
DSP: DynX Gen.2
-
Speaker protection: advanced limiters
-
Automatic column detection
-
Wireless column connection
-
Control: colour display & mobile app
-
Connections & Connectivity:
-
Audio streaming: Bluetooth 5.4
-
Audio inputs: 2x XLR & ∅6.35 mm jack combo
-
Audio outputs: 2x XLR
-
Subwoofer output: XLR
-
.
-
Subwoofer:
-
Type: active
-
Port design: bass-reflex
-
Driver: ∅18" (457 mm)
-
Driver housing: cast aluminium
-
Bass response: ≤28 Hz
-
Handles: 4
-
Material: birch plywood
-
Finish: polyurea
-
Colour: black
-
.
-
Column:
-
Design: cardioid, 4-way
-
Speakers: 16 × ∅3.5" (89 mm) neodymium magnets
-
Tweeters: 4 × ∅1" (25 mm) voice coil ∅1" (25 mm)
-
BEM-optimised waveguide
-
Optimised phase alignment
-
Material: aluminium
-
Finish: powder-coated
-
Colour: black
-
Dimensions: 2446 x 689 x 518 mm
-
Weight: 57.1 kg
To find out more...
• 4-way column sound system for large-scale set-ups.
• 18-inch subwoofer with a bass response down to 28 Hz.
• 16 x 3.5-inch neodymium drivers for the midrange.
• 4 x 1-inch compression drivers dedicated to high frequencies.
• 120 x 25° coverage pattern for even coverage of the listening area.
• 2nd-generation DynX DSP with built-in limiters.
• Wireless connection between the subwoofer and the column.
• Automatic detection of the column upon connection.
• Bluetooth 5.4 with support for AAC and aptX codecs.
You may also like
Spotlight on
Germany-based LD Systems, a branch of the Adam Hall brand, has become a recognized brand of professional audio products in just a few years. Known for their sound systems, stage monitors, ear monitors and wireless systems, LD has established itself as one of the leaders in its category when it comes to manufacturing quality and, of course, sound. Their MAUI series has largely contributed to this reputation!