Mipro - Pack ACT 626 + 2x ACT 600T + MP 820

A wireless system becomes truly versatile when it is no longer limited to a single type of microphone. With the ACT 626 Pack + 2x ACT 600T + MP 820, the two transmitters can be configured according to the sources to be connected: speech via a lavalier microphone, a presentation using a head-worn microphone, or an instrument fitted with a compatible cable. Changing the source therefore does not require any adjustments to the receiver installed in the control room.

The ACT-600Ts feature a particularly compact bodypack design measuring 63 × 80 × 25 mm and weighing just 96 g. Their backlit display shows the channel, audio level and battery status, whilst the controls allow users to adjust the gain, low-cut filter, limiter and RF power, amongst other settings. A mute function is available directly on the unit and can also be controlled via an external connection.

The real benefit of the system lies in the separation of the two audio paths. The ACT-626 features two independent channels, each providing a balanced XLR output. The two sources can thus be routed separately to a mixing desk, with their own levels and processing. Digital diversity reception, a 48 MHz bandwidth and 256-bit encryption provide a suitable foundation for installations where multiple parameters need to be carefully managed.

For installation, the ACT-626 can be mounted directly into a 19" rack. Auto Scan and ACT simplify frequency allocation, whilst the MIPRO Wireless Console allows you to monitor frequencies and manage the system from a computer. Dante or AVB interfaces are also available as options for integration into certain digital audio environments.

The MP-820 combines both transmitters on a single charging station. They can be placed back in the station immediately after use and recharged simultaneously via contact points, with LEDs indicating power, charging and when charging is complete.