Sennheiser - EW-DX EM 2 DANTE (S1-10)
1 165,83 €
excl VAT
including eco-part : 0,07 €
In Stock
Usually ships within 3 days
+infos
Guarantee 3
years
Jessie
Louis
Do you need help?
Wireless Microphone
Sennheiser EW-DX EM 2 Dante S1-10, two-channel digital receiver in half-rack format (9.5″) with native 24-bit Dante® audio output (48/96 kHz). Designed for Evolution Wireless Digital systems, it operates in the 606.2 - 693.8 MHz range, offers up to 88 MHz of RF bandwidth and incorporates AES 256 encryption with a system latency of 1.9 ms.
ARTICLE N° 119354
Presentation
The Sennheiser EW-DX EM 2 Dante S1-10 is a two-channel digital wireless receiver in half-rack (9.5″) format designed for professional audio environments. It is part of the Evolution Wireless Digital series with Dante® interface for direct integration into audio over IP networks. The S1-10 variant covers the 606.2 - 693.8 MHz RF range, suitable for areas where this band is permitted for professional UHF systems.
The receiver offers an extended switching bandwidth of up to 88 MHz, supporting dense channel management without interference thanks to equidistant spacing (standard mode up to 146 channels, Link Density mode up to 293 channels). The network connection via RJ-45 enables the device to be powered using PoE (IEEE 802.3af Class 3) or an external 12 V power supply, while integrating audio signals directly into a Dante® infrastructure with resolutions of up to 96 kHz in 24 bit.
Wide dynamic range, low latency of 1.9 ms and AES 256 encryption ensure reliable and secure RF transmission, while the user interface with OLED display and intuitive navigation simplify configuration and operation.
The receiver offers an extended switching bandwidth of up to 88 MHz, supporting dense channel management without interference thanks to equidistant spacing (standard mode up to 146 channels, Link Density mode up to 293 channels). The network connection via RJ-45 enables the device to be powered using PoE (IEEE 802.3af Class 3) or an external 12 V power supply, while integrating audio signals directly into a Dante® infrastructure with resolutions of up to 96 kHz in 24 bit.
Wide dynamic range, low latency of 1.9 ms and AES 256 encryption ensure reliable and secure RF transmission, while the user interface with OLED display and intuitive navigation simplify configuration and operation.
Other features
-
Sennheiser EW-DX EM 2 DANTE (S1-10)
-
Manufacturer Reference: 509358
-
2-channel 9.5″ half-rack digital receiver for Evolution Wireless Digital systems
-
Two half-rack (9.5") digital channels with Dante® in a rugged metal housing
-
Switching bandwidth up to 88 MHz
-
Flexible network modes: single cable (Control, Dante®, PoE), split mode (Control + PoE and Dante® daisy-chain), redundant mode (Control + PoE, Dante® primary, Dante® secondary)
-
1.9 ms low-latency wireless transmission using Sennheiser's proprietary Performance Audio Codec (SePAC)
-
134 dB input dynamic range: no need to adjust the gain of your wireless transmitters thanks to the proprietary Sennheiser Performance Audio Codec (SePAC)
-
Equidistant frequency spacing for easy channel allocation without intermodulation: standard mode with 600 kHz spacing for up to 146 channels; Link Density (LD) mode with 300 kHz spacing for up to 293 channels
-
Works seamlessly with SoundBase software, unifying your workflow into a single, simple platform
-
Network integration for extended remote control with Sennheiser Control Cockpit and Wireless System Manager tools, as well as third-party media control systems via a plug-in
-
Power over Ethernet (PoE IEEE 802.3af class 3)
-
Ethernet connectivity (IPv4 and IPv6)
-
AES-256 and Dante Media Encryption offer the best protection against signal piracy
-
Quickly scan your environment and deploy frequencies with equidistant channel spacing, even without RF knowledge
-
Link Quality Indicator (LQI) displays link quality independently of RF levels
-
Remote control from the Smart Assist application via Bluetooth® Low Energy (BLE) at distances of up to 25 metres
-
Clear, easy-to-use user interface with OLED display, navigation wheel and control buttons
-
Selective headphone output with front panel volume control
-
Extensive menu settings such as custom frequency list, selectable sync setting and walk test mode
-
12 V/1 A external power supply
-
International use (specific frequencies subject to local RF regulations)
-
RF :
-
S1-10 band: 606.2 - 693.8 MHz
-
Switching bandwidth: up to 88 MHz
-
146 equidistant channels (standard mode)
-
293 channels (Link Density mode)
-
RF encryption: AES-256
-
System latency: 1.9 ms
-
Dynamic range: 134 dB
-
Frequency response: 20 Hz - 20 kHz (-3 dB)
-
Distortion: ≤ -60 dB at 1 kHz (@ -3 dBfs)
-
Audio & networking :
-
Dante® digital audio output (RJ-45)
-
48 kHz / 96 kHz - 24 bit
-
Ethernet IEEE 802.3
-
1000Base-T (full duplex)
-
100Base-TX
-
IPv4 & IPv6
-
Max audio output level: 18 dBu
-
Headphone output: 2 × 70 mW @ 32 Ω
-
Power supply :
-
Input voltage: 11 - 13 V ⎓ or PoE IEEE 802.3af Class 0 (CAT5e or higher)
-
Max power consumption: 12 W
-
Input current: ≤ 1 A @ 12 V
-
Bluetooth® Low Energy: 2402 - 2480 MHz
-
Transmission power (mA) : BLE: max. 10 mW EIRP
-
Construction :
-
Format: half-rack 9.5″
-
2 channels
-
Metal casing
-
OLED display
-
Case dimensions (W x H x D): 212.1 × 44.2 × 204.6 (all-in) mm
-
Weight: approx. 1000 g (without antennas and power supply)
-
Operating temperature: -10°C to +50°C
-
Relative humidity: 5 - 95% (non-condensing)
-
Scope of delivery: EW-DX EM 2 rack-mount receiver, GA 3 rack-mount kite, EW-D power supply unit with country adapters, 2x antennas, rubber feet, user guide, safety guide, manufacturer's declaration sheet
-
Also available in non-DANTE version
To find out more...
Frequency variants / Region
Q1-9 = 470.2 - 550 MHz / EU, USA, Canada, Middle East, Japan
R1-9 = 520 - 607.8 MHz / EU, USA, Canada, Australia, Middle East, Japan
S1-10 = 606.2 - 693.8 MHz / UK, Australia, Korea, Japan
S2-10 = 614.2 - 693.8 MHz / EU
S4-10 = 630 - 693.8 MHz / China, New Zealand
U1/5 = 823.2 - 831.8 MHz and 863.2 - 864.8 MHz / EU, UK
V3-4 = 925.2 - 937.3 MHz / Korea
V5-7 = 941.700 - 951.800 & 953.050 - 956.050 & 956.650 - 959.650 MHz / United States, Canada
Y1-3 = 1785.2 - 1799.8 MHz / EU, UK, Australia
Q1-9 = 470.2 - 550 MHz / EU, USA, Canada, Middle East, Japan
R1-9 = 520 - 607.8 MHz / EU, USA, Canada, Australia, Middle East, Japan
S1-10 = 606.2 - 693.8 MHz / UK, Australia, Korea, Japan
S2-10 = 614.2 - 693.8 MHz / EU
S4-10 = 630 - 693.8 MHz / China, New Zealand
U1/5 = 823.2 - 831.8 MHz and 863.2 - 864.8 MHz / EU, UK
V3-4 = 925.2 - 937.3 MHz / Korea
V5-7 = 941.700 - 951.800 & 953.050 - 956.050 & 956.650 - 959.650 MHz / United States, Canada
Y1-3 = 1785.2 - 1799.8 MHz / EU, UK, Australia
Additional documents
You may also like
Accessories
Spotlight on
Sennheiser is the brand that best combines the professional and consumer worlds. From dynamic guitar mics to drum mics, condenser mics and even wireless systems for musicians, Sennheiser has the right instrument mics for every need. From the wired E-series mics, the high-end EW wireless series and the indispensable HD headphones, there's something for everyone. Our bestsellers: the XSW microphones, the HD 25 DJ headphones and for the more discerning audiophile: the HD 650.
