Ortofon Hifi - MC X40
831,67 €
excl VAT
including eco-part : 0,50 €
In Stock
Shippable immediately
+infos
Guarantee 3
years
Hifi Cartridge
With the Ortofon MC X40 cell, each microgroove gets a surgically precise slap in the face. Sharp as a Japanese blade, it features a Nude Shibata diamond mounted on a boron cantilever - stiffer than a Turkish coffee and lighter than a flute solo. The pure silver coils and MIM-moulded honeycomb internal structure provide reinforced concrete acoustic stability. The result? A strikingly detailed sound image, perfect stereo balance and a responsiveness worthy of a cat on the prowl. In short, a cell that reads the groove like a well-kept secret.
ARTICLE N° 110015
Presentation
The Ortofon MC X40 doesn't mess around with diamonds. The custom-cut Nude Shibata hugs every groove with diabolical precision, while the boron cantilever ensures transmission without the slightest softness. The result? Meticulous playback, a speed of execution that would make a Formula 1 car blush, and a sonic relief where every frequency has its place in the sun.
Under the bonnet, the high-purity silver coils are no gimmick. They inject a rarely achieved signal clarity, avoiding any magnetic pollution. Add to that a frequency response calibrated from 20 Hz to 20 kHz, and you get a sound that snaps, breathes and nuances like a live recording under a stethoscope. It's surgical, but never cold.
And what about the chassis? It's not just a stand, it's a suit of precision armour. Made from a stainless steel honeycomb alloy using metal injection moulding (MIM), it guarantees formidable physical stability and a longevity that will make obsolescence a thing of the past. Even the PVD surface treatment acts as a guardian of time, maintaining both the elegance of the design and the purity of the signal.
Finally, the suspension developed in-house at Ortofon has left nothing to chance. The selected rubber absorbs vibrations like a well-calibrated studio cushion, keeping the coil in the optimum position. The result: smooth listening, without distortion or slippage, even in the tight corners of your most intense tapes.
Under the bonnet, the high-purity silver coils are no gimmick. They inject a rarely achieved signal clarity, avoiding any magnetic pollution. Add to that a frequency response calibrated from 20 Hz to 20 kHz, and you get a sound that snaps, breathes and nuances like a live recording under a stethoscope. It's surgical, but never cold.
And what about the chassis? It's not just a stand, it's a suit of precision armour. Made from a stainless steel honeycomb alloy using metal injection moulding (MIM), it guarantees formidable physical stability and a longevity that will make obsolescence a thing of the past. Even the PVD surface treatment acts as a guardian of time, maintaining both the elegance of the design and the purity of the signal.
Finally, the suspension developed in-house at Ortofon has left nothing to chance. The selected rubber absorbs vibrations like a well-calibrated studio cushion, keeping the coil in the optimum position. The result: smooth listening, without distortion or slippage, even in the tight corners of your most intense tapes.
Features
Type of set
Cell + Diamond
Point
Shibata, Nude (Uncoated)
Cell
Moving coil
Cartridge format
MC
Magnet
Moving Coil (MC)
Weight
8,6 g
Frequency response, low limit
20 Hz
Frequency response, upper limit
20 kHz
Packaging
Single unit
Output voltage
0,4 mV
Color
Black
Other features
-
Ortofon MC X40
-
Cartridge + diamond assembly for turntable
-
Series: MC X
-
Cell type: moving coil (MC)
-
Diamond : Nude Shibata
-
Diamond tip radius: r/R 6/50 μm
-
Cantilever: boron
-
Suspension: rubber designed and manufactured by Ortofon
-
Coils: 4 coils on split pole supports (2+ / 2-)
-
Coil wire: high purity silver
-
Frequency response: 20 Hz ~ 20 kHz (+/- 1 dB)
-
Output voltage: 0.4 mV (5 cm/sec)
-
Channel separation at 1 kHz: 26 dB
-
Channel balance at 1 kHz: 0.5 dB
-
Lateral dynamic compliance: 15 μm/mN
-
Recommended load resistance: > 50 Ω
-
Internal impedance / DC resistance: 6 Ω
-
Recommended contact force: 2.0 g
-
Cell weight: 8.6 g
To find out more...
Ortofon isn't just a neat logo on a classy cell. It's a century of Danish engineering, masterful curves and finely sculpted sounds. The MC X series, of which the MC X40 is the pinnacle, embodies this obsession with detail and pure sound.
And if you want to go even further, don't forget the right phono cables, a quality MC preamp and even a serious vinyl cleaner to make sure your diamond doesn't swallow the crumbs.
And if you want to go even further, don't forget the right phono cables, a quality MC preamp and even a serious vinyl cleaner to make sure your diamond doesn't swallow the crumbs.
