Ortofon Hifi - MC Quintet Bronze
582,50 €
excl VAT
including eco-part : 0,50 €
In Stock
Usually ships within 48h
+infos
Guarantee 3
years
Quentin
Léon
Do you need help?
Hifi Cartridge
The MC Quintet Bronze cartridge delivers highly accurate, detailed sound reproduction. It is capable of reproducing the slightest nuances and subtleties of the music, allowing you to plunge right into the heart of the recording. The cell is equipped with a Fine Line diamond, which offers better reproduction of detail than a round diamond. It is also equipped with an exceptionally pure copper coil (4N), which guarantees faithful reproduction of groove variations.
ARTICLE N° 92677
Presentation
The Ortofon MC Quintet Bronze phono cell is a moving-coil (MC) model that delivers highly accurate and musical sound reproduction.
Its sound reproduction is musical and balanced. Low frequencies are deep and powerful, mids are clear and detailed, and highs are brilliant and precise.
The cell is very well balanced, allowing you to enjoy the music in its entirety, without certain instruments or frequencies being emphasised or lost behind the rest of the spectrum.
Its sound reproduction is musical and balanced. Low frequencies are deep and powerful, mids are clear and detailed, and highs are brilliant and precise.
The cell is very well balanced, allowing you to enjoy the music in its entirety, without certain instruments or frequencies being emphasised or lost behind the rest of the spectrum.
Features
Type of set
Cell + Diamond
Point
Nude (Uncoated), Fine line
Cell
Moving coil
Cartridge format
MC
Magnet
Moving Coil (MC)
Mount
T4P (P-Mount)
Packaging
Single unit
Color
Bronze
Other features
-
Ortofon MC Quintet Bronze
-
Cartridge + diamond set
-
Made in Denmark
-
Type: MC (moving coil)
-
Mount : P-Mount T4P
-
Diamond type : Fine Line, Uncoated
-
Cantilever : Aluminium
-
Output voltage at 1 kHz, 5 cm/sec : 0,3 mV
-
Channel balance at 1 kHz: <1.2 dB
-
Channel separation at 1 kHz: >23 dB
-
Channel separation at 15 kHz: >15 dB
-
Frequency response: 20 Hz // 20 kHz
-
Readability: 80 µm
-
Compliance, dynamic, lateral: 15 µm/mN
-
Solenoid material: Copper
-
Cell body material: Polycarbonate/Aluminium
-
Stylus tip radius: r/R 8/40 μm
-
Magnet material : Neodymium
-
Recommended holding force: 2.1-2.5 g (21-25 mN)
-
Reading angle: 20
-
Internal impedance: 5 Ω
-
Recommended load impedance: >20Ω
-
Colour : Bronze
To find out more...
Here are just some of the benefits of the Ortofon MC Quintet Bronze:
- Precise, detailed sound reproduction
- Musical, balanced sound reproduction
- Versatile and compatible
- Easy to install and maintain
Nothing demonstrates Ortofon's long-standing resilience better than its commitment to refining analogue sound quality and continuing to develop new cartridge designs.
Since 1948, Ortofon has introduced around 100 different models of moving coil. The cartridges in this new series are more than worthy successors to the long line of models that have made Ortofon the world's leading manufacturer of phono cartridges.
Top mounting of the Quintet cartridges is easy and secure using the screws provided. The aluminium frame has threaded mounting holes and is easily fitted with 5 or 7 mm screws depending on the thickness of the cartridge holder.
The right angles, straight lines, visibility of the tip and sufficient distance between the disc surface and the bottom of the cartridge of the Quintet series will facilitate the correct mounting and alignment of the cartridge and tone arm. The Quintet series gives excellent results with most common tone arms.
- Precise, detailed sound reproduction
- Musical, balanced sound reproduction
- Versatile and compatible
- Easy to install and maintain
Nothing demonstrates Ortofon's long-standing resilience better than its commitment to refining analogue sound quality and continuing to develop new cartridge designs.
Since 1948, Ortofon has introduced around 100 different models of moving coil. The cartridges in this new series are more than worthy successors to the long line of models that have made Ortofon the world's leading manufacturer of phono cartridges.
Top mounting of the Quintet cartridges is easy and secure using the screws provided. The aluminium frame has threaded mounting holes and is easily fitted with 5 or 7 mm screws depending on the thickness of the cartridge holder.
The right angles, straight lines, visibility of the tip and sufficient distance between the disc surface and the bottom of the cartridge of the Quintet series will facilitate the correct mounting and alignment of the cartridge and tone arm. The Quintet series gives excellent results with most common tone arms.
