Palmer - PLI 04 Boîte de Direct passive 2 canaux pour PC et laptop
This product is no longer available for sale
These models in stock may be of interest to you:
190,83 €
excl VAT
including eco-part : 0,07 €
Guarantee 5
years
Jessie
Louis
Do you need help?
DI Box
2-channel passive direct box for PC and laptop, stereo, transformer-balanced outputs, Mono, Ground Lift and Soft-Ground selectors.
ARTICLE N° 42671
Presentation
This direct box has been developed to meet the special requirements of the media sector. It allows simple connection of computers or other consumers to unbalanced outputs. One special feature is that the PLI 04 can be set to mono summing by means of a switch, and the output signal is then sent to the two XLR outputs.
Features
Multichannel
Yes
Mass switch
Yes
Active / passive
Passive
Other features
-
Palmer Pro PRO MEDIA PLI 04
-
Passive direct box
-
2 channels
-
For PC and laptop
-
Passive stereo DI box, transformer-balanced outputs
-
Mono selector, ground lift selector, soft-ground selector
-
Inputs: 2 x 6.35 mm TRS jack, tip = + (hot); ring: - (cold); body: shield (ground), 2 x RCA (cinch), 1 x 3.5 mm mini jack, stereo mode
-
Input impedance: 6 kohms (source output impedance 600 Ohms)
-
Maximum input level: +6 dBu @ 30 Hz / 0.05 % THD, +16 dBu @ 30 Hz / 0.33 % THD, measured with a 200 Ohm impedance source
-
Outputs: 2 x XLR male, point 1: shield, point 2: -+ (hot); point 3: - (cold) (ground), transformer balanced
-
Output impedance: 600 Ohms nominal
-
Input/output attenuation: 10 dB
-
Transformer ratio: 3.16:1
-
Frequency response: 20 Hz - 20 kHz ± 0.5 dB
-
Phase rotation: < 3
-
Mono selector, Ground Lift selector: Lift, Ground, Soft Ground selector
-
Enclosure material: Sheet steel
-
Dimensions: 125 x 95 x 35 mm
-
Weight: 0.34 kgs
-
Handmade in Germany
To find out more...
Use a shielded cable to connect the left/right line outputs of the PLI04 to the sound system, and the input signal to the desired connector on the PLI04. Computer sound cards are generally equipped with a 3.5 mm stereo mini-jack connector or two RCA (cinch) connectors. On laptops, the stereo output also acts as a headphone socket.
Using several input connectors at the same time (e.g. jack and cinch/RCA) on the same channel is not recommended.
is not recommended, as the signals may be routed from one source to another.
If you are using a single channel, connect the signal to the red RCA socket to ensure earth connection.
Using several input connectors at the same time (e.g. jack and cinch/RCA) on the same channel is not recommended.
is not recommended, as the signals may be routed from one source to another.
If you are using a single channel, connect the signal to the red RCA socket to ensure earth connection.
