Sound Processing System

The combination of RIAA and active DI

ARTICLE N° 15674
  • The Radial J33 is a combination of RIAA and active DI allowing turntables to be directly connected to a professional mixing console via the microphone inputs. The J33 is ideal in archiving applications, sampling, scratch and mix when the best possible sound quality is desired.
  • The Radial J33 is designed for turntables and therefore has a stereo RCA input and output, the choice between RCA and 3.5mm stereo 6.35 (line level, high impedance, 10dB) and a pair of balanced outputs XLR (microphone level, low impedance). This makes it extremely flexible connectors J33. It can send the stereo signal on a DJ mixer and a professional sound system simultaneously. It can be used as a preamp RIAA in a hi-fi system, or as a RIAA preamp + DI.
  • The J33 can be powered by phantom power when it is available, or with the supplied AC adapter. The manufacturing quality is a reflection of the range Radial: indestructible!
  • Frequency response (curve RIAA) + 19.15dB 20Hz - 20kHz 19.65dB (Ref: 0 dB at 1 KHz)
  • Total harmonic distortion 0.005% at 1 KHz
  • RIAA maximum deviation +/- .5dB
  • Max level phono input 50mV at 1 KHz
  • High pass filter cut-off 200Hz, 100Hz -3dB
  • 10kOhm unbalanced outputs, line-level -10dB
  • Balanced outputs 600 ohms -60dB mic-level, pin 2 hot
The Radial J33 is a combination of RIAA and active DI allowing turntables to be directly connected to a professional mixing console via the microphone inputs. The J33 is ideal in archiving applications, sampling, scratch and mix when the best possible sound quality is desired.

Spotlight on