DI Box

active DI box for micro Piezo designed specifically for acoustic and orchestral instruments. A three-position switch will choose the impedance depending on your microwave: 220kOhms for electromagnetic pickups 1MOhms as a classic and DI 10MOhm for piezo.

ARTICLE N° 54409
  • Radial Engineering PZ-DI
  • Active Direct box Micro Piezo
  • Circuit Analog FET
  • A low-cut filter removes unwanted frequencies, a high-cut filter will soften aggressive acute and pad -15dB serve, e.g., with a low active or a numeric keypad.
  • Frequency Response 20Hz ~ 20kHz
  • 105dB Dynamic Range
  • EIN
  • 98dBu - + 4.6dB Max Gain
  • THD 0.02%
  • Input Impedance 10M / 1M / 220K-ohm
  • Impedance with PAD 50K-
  • ohms output Impedance 200 ohms
The Radial PZ-DI is a unique direct box that is specifically designed for acoustic and orchestral instruments.
Unlike most direct boxes, PZ-DI allows you to match the source impedance input to optimize the frequency response, dynamics and feel for a musical result.
The 3 position switch impedance setting is the focal point of the PZ-DI:
Position 1 meg ohm impedance provides classical available on most active DI boxes.
setting to 220k ohms generates a warming signal in order to agree to a magnetic sensor, as if the instrument was connected to a tube amp.
The 10 meg ohm position is used to compensate for his garish which usually emanates from instruments with piezo.
Multichannel
 No
Mass switch
 Yes
Active / passive
 Active

Spotlight on